Vintage guitars for sale: Vox Phantom

Vox Phantom Delta
In amazing condition, with some light checking and some small dings but exceptional condition for it's age. All effects are functioning and working as they should. Neck is super comfortable to play, thin and fast and super low action. Comes with original case and booklets and notes. Case is slightly damaged in 1 area where is is compromised however it's original and still works well and protects the guitar
Includes a original documentation and guarantee and Vox ... more

Very clean UK made Vox Phantom VI in black. There are virtually no scratches, dents, dings, or fret wear and is all original except one pickguard screw has been replaced. There is a slight discoloration on the pickguard as shown in the picture. Includes original hard case. The neck is straight and the truss rod works. It is set up with with 10s, the neck has 0 010" relief, and the 12th fret string height is 2 0 / 1 5 mm (low E / high E)
There are 3 single coil pickups and a "Bigsby like" ... more

Here??s a rare Vox Phantom IV bass from the mid-60??s. This model was especially associated with Phil Volk of Paul Revere and the Raiders, nicknamed Fang. It looks like an artifact from the Flintstones era!The Phantom IV was designed in London in 1961 for Vox. They were manufactured in England and Italy through 1966
This one is in good condition for its age (about 60 years old!). I believe it is all original, though it??s hard to confirm that. It comes in its original hard case. No doubt ... more

This Limited Edition Phantom (Vox) Hollowbody Teardrop guitar is in mint unplayed condition. It is #10 of only 20 made. All Phantom®, Teardrop® and MandoGuitars® are hand-assembled in the United States of America with foreign and domestic parts
The bookmatched flame maple top pattern in the see-through red finish does not show up too well in photos but it's stunning in person.
... more

This listing is for a set of 60's VOX 6 in line strip guitar tuners. Button shafts not bent. This type tuners came as original equipment on many Made in Italy vintage Vox guitars in the 60's. Original screws and bushings are included. .
I will ship most of my items to many countries other than USA, but I ask that all buyers contact me before making a purchase. Foreign buyers are responsible for all of their taxes and customs duties. I will NOT declare lower values or declare items as gifts ... more

Vintage 1960's Vox Guitar Knob Aluminum construction, ??Volume??, knurled crown, RED dot marker, flat head setscrew. Normal vintage wear with patina. RARE ORIGINAL VOX PART,   Phantom Consort Hurricane. THANKS for looking!
... more

Rare original Vox / Eko "TONE I" control knob with red indexing dot from the 1960s, as used on Vox Phantom VI and XII guitars made in the UK and Italy, and possibly used on some Bobcat, Lynx, Hurricane, Starstream, and other models as well
The "TONE I" imprint fill is still dark and shows in high contrast against the aluminum base
It measures 7 / 8" in diameter, and 9 / 16" high, and shows normal wear consistent with age
READ VERY CAREFULLY
The photos account for a significant ... more

Correct for many vintage Vox guitar and bass models. Please do your own research to determine if it's right for your instrument. Some scratches on plate. Original screws are included. Overall the plate is 2 9 / 16 inches by 1 9 / 16. The measurements from center to center of the screw holes are 1 15 / 16 of an inch by 15 / 16 inch. 1 3 / 4 inch screws.
7 % sales tax will be added to all items shipped inside the state of Florida. I will ship most of my items to many countries other than USA, ... more

Pair Of 1960's VOX STRING TREES Phantom Mark IV Wyman V250 Violin Teardrop BASS


Comes as shown with spacers and screws. Metal has some discoloration but still works fine.

No other parts included.
... more

Correct for many vintage Vox guitar and bass models. Please do your own research to determine if it's right for your instrument. Some scratches on plate. Original screws are included. Overall the plate is 2 9 / 16 inches by 1 9 / 16. The measurements from center to center of the screw holes are 1 15 / 16 of an inch by 15 / 16 inch. 1 3 / 4 inch screws.
7 % sales tax will be added to all items shipped inside the state of Florida. I will ship most of my items to many countries other than USA, ... more

Vintage 1960's Vox Guitar Knob Phantom Consort Hurricane and more... more

Vox / EKO neck plate no screws
... more

This listing is for one VOX string tree (retainer) and two strap buttons as used on many vintage Vox guitars in the 60's.
7 % sales tax will be added to all items shipped inside the state of Florida. I will ship most of my items to many countries other than USA, but I ask that all buyers contact me before making a purchase. Foreign buyers are responsible for all of their taxes and customs duties. I will NOT declare lower values or declare items as gifts under any circumstance.
... more

A fantastic original Vox from the same period as the Ian Curtis guitar .The actual original of this guitar the one Ian Curtis owned and played is worth around £250, 000- here is your chance to own pretty much the same guitar a 1960s white Vox Phantom VI which was used in the Joy Division play that toured the UK in 2023 and 2024- comes with a period good condition case and plays beautifully- the push buttons are just dummies as the original push button models always had problems with the ... more

Vintage Vox Phantom bass IVVery rare to find one like this Looks cool plays great and sounds great All original electrics and hardware and all in good working order Neck is in fantastic conditionBody has the usual lacquer cracks (see pics) associated with Vox instruments of this age) but is in great shape I had a new scratch plate professionally made with identical laser etched logo. I do have and will include the original scratch plate which has shrunk a bit but is still usable ( see ... more

1968 VOX PHANTOM GUITAR BODY :
* finish has a lot of weather checking & wear
* included are some non original parts=check pics... more

60's VOX PHANTOM GUITAR NECK - made in UK
* 2 dots at end of fingerboard are missing
* extra screw holes at heel
* a faint PHANTOM logo is still visible
* TRUSS ROD NUT IS BROKEN !
* NEEDS REPAIR
* SOLD AS IS - NO RETURNS
... more

1968 VOX PHANTOM GUITAR BODY :
* finish has a lot of weather checking & wear
* included are some non original parts=check pics
... more

This is a very cool and pretty rare old guitar. Made by JMI in the UK
The Consort was a higher end model - far better than the Shadow / Duotone / Clubman series which were all a bit flimsy in comparison
This one is in great condition cosmetically - nice original finish, not much wear on the body, frets have very little wear, and the decals are in great condition. Original Morganite pots date this to October 1963. Original 5-digit serial number seems to be 45154
I was hoping to ... more

60's VOX PHANTOM GUITAR CASE :
* black tolex, has some wear and a small dent (pic 4)
* golden interior, has light wear
* right latch has a bend
* only 3 intact case corners, the other ones are broken or gone, 1 new bigger one was installed
* hard to find !
... more

60's VOX PHANTOM GUITAR CASE :
* black tolex, has some wear and a small dent (pic 4)
* golden interior, has light wear
* right latch has a bend
* only 3 intact case corners, the other ones are broken or gone, 1 new bigger one was installed
* hard to find !
... more

Manufactured by Phantom Guitars in Oregon, USA after acquiring the licence from Vox, they literally don't make them like this much-loved, nine-string wonder anymore. Great sound and action. The 1st, 2nd and third strings are doubled, while the 4th, 5th and 6th strings are single, giving your rhythm chords a unique sound (The middle G string is doubled with a high G string). The action is smooth enough to play it as a lead guitar. It has five tone settings that range from a heavy Gibson sound ... more

* somebody scratched numbers into it
... more

Vintage 1960's Vox Guitar Knob Phantom Amplifer.... more

Original mid 1960s Vox part. This was originally fitted to a 1965 Vox Soundcaster. Will fit numerous JMI (UK) guitars and basses models. JMI used different sized neck plates during their 1960s Vox manufacture. This is 2" x 2 3 / 8" (for screw spacing 1 1 / 2" x 1 7 / 8" approx). No serial number or other markings
Very clean used condition. Surface scratches and minor wear, but the chrome still looks great
... more