Vintage guitars for sale: Bristol

1956 Gibson ES-175 vintage archtop in sunburst. A rare and sought-after classic among Jazz / Blues players / collectors. The guitar and case are all original & in perfect working order The catches & hinges on the case all work perfectly and close firmly. The guitar comes with the original hang-tag and supplied cable. The hang-tag has a crease but is fully legible The guitar is fitted with 10-46 gauge strings. If you prefer a different gauge, let us know & we will fit them & set ... more

Martin 000-28 1954 acoustic. rose wood body, ebony fretboard. Original case functions perfectly & all clips / clasps close firmly. The bridge has been re-glued in position and the guitar set-up with a comfortable playing action which is rare in these instruments
Feel free to come & try the guitar at our guitar shop, Rikaxxe, in Bristol before purchase but let us know beforehand so we can arrange free, secure, on-site parking.... more

This is a nice example an elite precision. Very well kept. Has been used for 5 different concerts, and 2 different recording studios. I have had this from new. Incudes spare sets of strings and case included. Typical USA model.
... more

An original valve vintage Orange PA system 120 1970s with 2 speaker cabinets.... more

This is a pre-owned Marshall JMP 2203 Mk2 Master Model 100W valve amp head, perfect for any guitar enthusiast. The amp has two channels and uses vacuum tube technology to amplify sound. It is a head amplifier, meaning it does not come with a speaker attached. The Marshall JMP 2203 Mk2 is a highly sought-after item for any musician looking to upgrade their guitar setup. This amplifier has a powerful 100W output and is designed specifically for guitar use. It is a great addition to any collection ... more

1963 Gibson Melody Maker D
Here we have a beautifully refinished Gibson Melody Maker, complete with a stunning dark Brazilian Fretboard and the original pair of pickups.
This is all mahogany and rings like a bell and has the earlier, larger vintage Melody Maker pickups which are a lot closer to the P90 sound than the later smaller pickups Gibson use post 1965
A few changes with replacement bridge and TRC and perhaps a refret, but the body doesn't appear to have been messed with and ... more

Quad 4x Vintage 1971 Celestion Greenback G12H 30w 16ohm 75hZ T1217 12" Speakers
This is a set of four Celestion G12H T1217 speakers, three of which are in original condition with their original Pulsonic 102 3 cones, and one of which has had a recone with 444 cone (recone carried out prior to my ownership, likely to be a Kurt Mueller cone)
One of the speakers dates to 6th January 1971 and three of the speakers date to the 3rd February 1971
In addition, one of the speakers is missing ... more

Wow!
You don??t see many of these?? it??s a complete, working Roland G-88B synth unit, bass and cable. Oh and it??s also got the box and the instructions too!
These are super cool basses all built by Ibanez. The bass has a through Maple neck with Walnut wings an Ebonized Rosewood fingerboard
It??s fitted with a GOD1BS Divided pickup, Master volume, Guitar EQ, Guitar Synth balance, VCF Cutoff Freq, VCF Resonance Switch VCO / Duet Virato depth controls, and more
Using the super rare... more

Marshall JVM410H Valve Head + 1960A 4x12 Cabinet ?? Footswitch Included
Marshall JVM410H valve amp head paired with a Marshall 1960A 4x12 cabinet
A powerful and versatile full stack, ready to go
?? 100W JVM410H all-valve head
?? Marshall 1960A 4x12 cab
?? Footswitch included
?? Fully working
? Amp Details
?? 4 channels (Clean / Crunch / OD1 / OD2)
?? 3 modes per channel (12 total tones)
?? Dual master volume controls
?? Built-in reverb
?? MIDI ... more

Here we have a Jimi Hendrix style Replica of a 1965 Strat, with the neck beautifully finished by John Coleman and an extremely convincing and aged lightweight swamp ash body
This is a top quality replica, and not a simple bolt-together.
Since I bought it, I have had it rewired Hendrix style and a set of pickups from a first run Fender Stratocaster Classic installed - the legendary Abigail Ybarra 'AY' initialled ones. Which sound brilliant, it has to be said
The neck has a nice C ... more

Ugly but fully sorted, recapped, new valves, new reliable impedance selector. Original Partridge iron, mustard caps. Laney Klipp is the model that follows the Supergroup, similar circuit with a Klipp circuit added, which is basically a valve fuzz. Missing back panel. This is a serious device
Obviously this is a heavy lump, but I can have it couriered, would massively prefer collection though. I can also do international shipping, but if you want international shipping, please get in touch ... more

Marshall JVM410H valve amp head with Marshall 1960A 4x12 cabinet ?? includes footswitch
Great sounding setup overall, with one fault to note (see below), reflected in the price
?? 100W JVM410H valve head
?? Marshall 1960A 4x12 cab
?? Footswitch included
?? Reverb not working
? Amp Info
?? 4 channels (Clean / Crunch / OD1 / OD2)
?? 3 modes per channel (12 total tones)
?? Dual master volumes
?? MIDI capable
?? FX loops included
The amp works well in ... more

Super cool 1960s Teisco Vegas 66 wierd and wonderful Japanese electric guitar.
It features two single coil pickups with square raised pole pieces, a 3 way switch and two x vol , 1 x tone controls. The switching is slightly unusual , it's labelled Bass, Solo and Rhythm and the tone control operates in reverse to most modern guitars
It has typical Teisco style tremolo, a bolt on neck and quite thick semi body , somewhere between a 335 and and a Jazz box in width.
Its used but a really ... more

1979 Ovation 1117 Legend bowl back acoustic guitar. Made in Conneticut USA. (6 digit serial number on silver sticker on the inside)
This is the straight acoustic , not electro version
Pre owned good condition, used and aged but generally pretty clean overall
Thgis is a great sounding and easy playing USA built Ovation. It features an ebony neck with diamond inlays and MOP / black raised soundhole ring
There are small marks , and surface scratches in places. There are light wear ... more

A rare ?Epiphone by Gibson?? Epiphone Sheraton. Only sold with this headstock around 1988-1989. Made in Korea, it??s exceptionally well constructed compared to today??s Sheratons . Little to no marks on it??just the usual patina on the golden hardware and a pleasant ?amber?? developing to the poly finishing, giving it some real vintage mojo.
I upgraded the tuners to Gotoh locking models (£90) as I love the convenience and a little extra tuning stability. Originals included too if you want ... more

Fabulous vintage top-spec Flying V from Kay finished in natural ash, maple and walnut.
A rare and reassuringly potent Flying V here featuring gorgeous thru-neck maple and walnut construction, flanked by two beautifully figured ash wings. Providing the firepower are two active coil tapped zebra humbuckers activated by the two switches. These are excellent pickups, with the coil tap providing some subtle versatility alongside the full-throated roar.
Other top-end appointments include ... more

This is a lovely sunburst 1967 / 8 Levin LN-26 Goliath Acoustic guitar in excellent original condition. As to be expected for a guitar this age there are small dents and scratches & lacquer crazing. It appears to have a pickup fitted but I haven??t had a chance to test it. There is a line around the heel which you can see in photos. I believe is wood shrinkage rather than a hairline crack. I say this because the neck angle is fine and the guitar plays perfectly. Comes with the Hiscox case. ... more

Antoria J200 Acoustic Guitar
Brand famously highlighted on the Oasis Wonderwall video and an amazing instrument. Antoria used by Noel on a lot of the early stuff. other famous users included Noddy Holder (Slade)
These early 80s made classics are now very difficult to find in this condition - well presented with some marks on the front, sides / binding and back from usual use and as expected from a c 40year old guitar. dot inlay model. 40 / 50 years old and fantastic used condition. this ... more

1960 Watkins Rapier 33 - Rare Set Neck - Serial Number: 408
Here we have a rare, set neck Watkins Rapier. All original as far as I can tell, and still playing beautifully, complete with original tremolo arm
These are great British Guitars, and still very playable
I bought this for a recording project as it has it's own unique sounds if you dig deep, and a period approach to the controls that is as cool as it is quirky
Recently set-up:
A working piece of guitar history
This ... more

Bell and Howell Filmoscound 385 Valve / Tube Amp & Cab 1950??s
Comes with Step-Down converter and Speaker cab already wired in
Rare to find in the UK!
Must be over £400 worth of parts with the Valves, proper iron from the 50's Transformers etc
No Circuit boards here just hand wired !
You can also see one in Ry Cooders Studio during the recording of ?Prodigal Son??
??Whether it??s a gig or in the studio, these amps create an ambience. It??s a fat, old-fashioned sound ... more

1950s Hofner president, well used from the 50s-90s, a well looked after and very much played and loved guitar Has had a pickup fitted in the mid 60s, used in bigbands and small jazz bands in its life from new. This has been in the family and past down to me, sadly now unused It has a lot of nice wear and patina, but still in great shape for a gigging instrument Nothing nasty no breaks and a nice playable neck Comes with a nice quality case
NOTE COLLECTION ONLYThank You... more

Marshall 1960 angled guitar cab available for sale
Comes with live-in flightcase from Flightcase Warehouse
Cab is in great condition and fully working. Always kept inside of the flightcase.
Collection only from Lydney, Gloucestershire
Can also arrange collection from Bristol if more convenient
Thanks for looking!... more

A jazz machine of refinement and elegance here from Aria Pro II, finished in beautifully aged white.
Put together in the early 1990s, this luxuriously appointed guitar boasts a spec the envy of guitars twice the price. There's full hollowbody construction, luxurious split-inlay work up that deliciously dark rosewood fretboard, a Bigsby trem amongst that subtly aged gold hardware, full binding, and two fabulously smooth humbuckers. The branded scratchplate is a lovely touch too.
This ... more

1970??s Rickenbacker TR25, solid state guitar amplifier.
Amazing clean sound, great spring reverb and tremolo.
All electrolytic capacitors replaced with quality Vishay caps. Ready for its next 50 years of use!
New power switch - some previous owner had fitted a micro toggle and what looked like a magnetic door closer as a spacer! All back to original now including the polarity reverse.
Modern 5x20mm fuse holder fitted - if a fuse does blow, they??re much easier to find than a 1 /... more

1970s Japanese Onyx Strat finished in deep three-tone sunburst.
A vintage guitar of character and charm here. Made with skill in the illustrious Chushin Gakki plant, this guitar, made for the Australian & Canadian market is an exceptionally rare find in the UK. It boasts a full sized solid tonewood body, along with a period large 70s Fender style headstock & bullet truss rod mechanism, three way switching, a gloriously playable gloss maple neck and three beautifully voiced single ... more

Stunning 1980s MIJ Stratocaster finished in rare Metallic Burst.
A vintage Japanese Strat of superb quality here. Beyond that fabulous aged burst finish, there's a beautifully worn maple neck and two belting rail pickups in that black scratchplate, controlled by a single volume control. This loaded plate seems to be an upgrade to the original and it's a worthy one at that. Up top, there's a set of Wilkinson tuners and a smoothy operational 70s bullet truss rod mechanism.
This is a guitar... more

Genuine very rare stamped 1960's Hofner guitar tail piece
In very nice original condition. There are a few age marks etc but they no doubt add to the charm. I have added front and back photos so please look carefully as they make up the main description. I haven't tried to clean it and sure it would come up very nicely but it isn't the done thing today so have left as is for the buyer to choose how to clean. This is the rare Hofner stamped version of the Lyer
I will consider ... more

Genuine very rare stamped 1960's Hofner guitar tail piece
In very nice original condition. There are a few age marks etc but they no doubt add to the charm. I have added front and back photos so please look carefully as they make up the main description. I haven't tried to clean it and sure it would come up very nicely but it isn't the done thing today so have left as is for the buyer to choose how to clean. This is the rare Hofner stamped version of the Lyer
I will consider ... more

Madeira by Guild A-25 acoustic guitar. Plays well. Made in Japan. Bought on Tottenham Court Road in 1978. Single owner (private seller) played it in a new-wave band. Been gathering dust for decades. No case. Shows its age in various marks (see pics)
Collection in BS6 strongly preferred.... more

1970s Antoria 952 Acoustic guitar. Made in Japan and distributed by JT Coppock
It features a Spruce top with Mahog neck with a soft V profile and mahog back and sides however it's an unusual arched back described by Antoria ina perid catalogue as "Full Reflection Braceless Construction " , or "Swellback " . I think it's loosely based on certain Guild models of the same era which also used an arched back construction.
The action is low and its nicely playable. The neck is straight and... more

1970s Japanese Kimbara Strat finished in naturally aged White.
A vintage guitar of character and charm here. Made with skill in the famous Matsumoku plant, this guitar boasts a solid Japanese ash body, along with a period large Fender style headstock, three way switching, a fabulous gloss maple neck, a lovely slab rosewood fretboard, 21 nicely dressed frets and three beautifully voiced single coil pickups.
Either as a modding platform, or a guitar in its own right, you'd be hard pressed ... more

Cimar 12 string dreadnought acoustic guitar in very good condition, recent new strings
Spruce top with mahogany neck
20 nickel silver frets
Chromed machine heads
Scale length: 651mm
Body length: 515mmWidth: 400mmDepth: 125mm... more

I wasn't sure what this pickup was at first and I had advertised it as vintage but another user told me it's an Adeson made pickup for a Fenton Weill guitar. Circa 2000s / 2010s. Made in the UK
Adeson pickups seem to be well thought of online and supplied handmade replica pickups for Burns, Fenton Weill etc. I'm not sure they are are still in production as the website no longer is in use
There are two available at the time of listing, price is for one
Both read 7 8K on my meter and ... more

A rather lovely unbranded Les Paul Custom from what looks like 1980s Far East, with upgraded Duncan Invader style humbuckers
This is an interesting vintage rock machine with plenty of charm. It feels hefty on the shoulder, as any decent LP should, and there's a lovely rosewood fretboard with good frets for age, along with mother of pearl block inlays. The Invader style humbuckers provide plenty of grunt as you'd expect and this guitar plays rather nicely.
The hardware is an interesting ... more

1970s S T.C. electric guitar one piece bridge / tremolo unit. Made in Japan
From info seen online these came on some Tokai and Greco models from circa mid 1970s
Comes with mounting screws, springs, claw, as pictured. No arm included.
Some tarnishing and general signs of use
52 5mm string spacing
Free UK postage
... more

1980s Vox Standard Bass guitar body. Made in Japan by Matsumoku
Solid Maple body with black finish. Quite heavy as all these are at 3 6kgs approx on my scales as pictured
As pictured, marks, surface scratches , some minor indents / dings and general signs of use
63 5mm neck pocket width
Comes with strap buttons and jack input as pictured
Free UK postage
... more

1980s Vox Standard Bass guitar neck. Made in Japan by Matsumoku
Solid Maple neck / fretboard with black headstock
As pictured, marks, light fretwear as shown, some minor indents and general signs of use
63mm approx heel width. 40mm nut width, long scale - 860mm
Free UK postage
... more

Early 1960s Watkins Rapier 33 electric guitar. Matching red headstock. Body / Neck Only
Selling here as a project , spares / repairs - no returns
Serial 1634 so an early production version, set neck.
It's a little tired condition wise ,the lacquer is very checked all over and there are many marks , scuffs , indents and ageing
It did play pretty well before I decided to part it out so it maybe a fairly easy project for someone to get up and running
No case but it will be ... more

Vintage JMI Vox Stroller guitar body. Circa 1960s and made in the UK for Vox by G Plan.
Fair condition, to be expected for age with neck pocket cracks, lacquer cracks, crack between the neck pickup routing and the neck pocket , scuffs , scrapes and some chips and indents in places. As pictured
Neck pocket width 54mm approx
Free UK postage
... more

Here we have a rather beautiful little banjalele in fantastic original condition. Fantastically engraved back plate and original skin that will give a great sound. OK it needs restringing, but we all might after 30 or so years in the attic! Comes with the original case to keep it safe
I've really no idea where the thing came from - my rather bought home this and a full size banjo back in about 1973, and being the the younger brother, I got the small one and my elder brother got the banjo. ... more

Wau Wau Machine, 1970s vintage wah-wah pedal. In good working order with marks and signs of use commensurate with age. Battery power only.
This vintage Wau Wau Machine wah-wah pedal is a classic piece of musical equipment that will elevate your sound to new heights. Made in Japan, this analogue pedal is perfect for guitarists and bassists looking for that signature wah-wah effect. With its iconic sound and high-quality construction, this Selmer Wau Wau Machine pedal is a must-have for any... more

Original Hofner floating archtop bridge, taken from a 1959 Hofner Congress. May suit othe models such as the Senator and President
Good used condition with signs of use and age. Part numbers stamped on the underside of each half
Free UK postage. Will post worldwide
... more

Bass guitar neck from a 1970s Japanese made Eros Jazz bass.
I have seen the same on basses branded Columbus, CMI, Maya amongst others.
Used condition, some marks and age as pictured
Maple neck big block 70s style inlays.
61 5mm approx heel width.
Other parts available in my listings
... more

Here for sale is this Framus Texan 5 / 196 acoustic guitar body, dreadnought size. It was made in W Germany probably in the early 1970s , its used and fairly roadworn
Many marks, scuffs scrapes, indents and signs of use Requires a bolt on neck Scratches, lacquer cracks , lacquer checking Wear to the finish in places and a knock on the lower front edge, this has been given the once over by our repairman and its stable and historic but is visible The model number is 5 / 196 Unfortunately the ... more

Here for sale is this Framus Texan 5 / 196 acoustic guitar neck, It was made in W Germany probably in the early 1970s , its used / pre owned condition but generally good
Some marks, scuffs scrapes, minor indents and signs of use Lovely fretboard with some playing wear, frets show some wear Multi laminate construction as these necks were made Additional screw holes on the back of the headstock from replacement tuners The model number is 5 / 196. Unfortunately the year date stamp that was on... more

Fender volume and tone pots from 1979
Recently removed from a fully working left-handed 1979 Strat - so these work in reverse
Unfortunately I can't remember which is the volume pot and which are the tone pots, but here are the readings tested with my multi-meter:
Pot 1 reads 0-244Pot 2 reads 0-275Pot 3 reads 0-222
Please note the damage to one of the lugs
... more

Vintage circa 1970s / 80s Yamaha Classical Guitar case. Made in Taiwan and probably came with Yamha's mid - high end guitars produced in Taiwan during this time
Fits standard size classical guitars
Some marks in places but overall good order. All hinges, latches and handle fine. There are some marks and scuffs to the exterior. Inside is in good used condition.
Will be wrapped in card for shipping.
Free UK postage
... more

Vintage Jedson neckplate &screws. Circa 1970s.
From a Jedson Telecaster style guitar, other parts in my listings
Pre owned
Used, some scratches and marks and other tarnishing
Free UK postage
... more

Vintage 1960s / 70s Jedson electric guitar telecaster neck, made in Japan by Teisco.
Used condition, played well and was nice and straight when strung to tension, obvious wear, especially on the first three fret areas on the fretboard
It has plenty of scuffs, scrapes marks and minor indents but would be a good project for someone.
Roadworn condition. Approx heel width 55 5mm
Other parts available in my listings
... more

Early 1960s Watkins Rapier electric guitar bridge pickup. From a Rapier 33 but may suit other models
Used condition, as pictured
12 5K ohms on my meter. (Hotter than the neck and middle pickups I am also selling)
Free UK postage
... more

Vintage 1960s / 70s Jedson electric guitar tele style body, made in Japan by Teisco.
Laminate ply body. Off white finish, from the single pickup version
It has several scuffs, scrapes, marks, chips and indents but would be a good base for a project for someone. Overall good condition
56 5mm approx neck pocket width
Other parts available in my listings
... more

1960s vintage guitar pickup. Brass colour
Pre owned but working. I was told it was from a 1968 Ibanez but I don't know the model
Some signs of use but clean overall. Measures 5 6K ohms on my meter
Kind of mini humbucker size
Comes as pictured, inc surround
Free UK mainland shipping
... more

Maxon humbucker guitar pickup. Circa late 1970s.
Unbranded on the base but 99% certain it's Maxon made, the slightly enlarged slot head pole pieces are a bit of a giveaway and it was labelled 70s Maxon by a previous owner (when I purchased it in a job lot of pickups)
It is similar to other Maxon pickups I've sold previously, and a google image search of the back of the pickup also says its Maxon . As used on Ibanez, Greco and other japanese guitars of the era
Good used condition - ... more

Vintage 1960s / 70s Futurama Sophomore electric guitar body, made in Japan by Guyatone
Solid wood body. Generally condition, has some marks, scuffs , scrapes and minor indents.
Approx neck pocket width 56mm, thin body - 30mm thickness approx
Other parts available in my listings
... more

Early 1960s Watkins Rapier electric guitar middle pickup. From a Rapier 33 but may suit other models
Used condition, as pictured
5 8K ohms on my meter.
Free UK postage
... more

Vintage 1960s / 70s Top Twenty electric guitar body, made in Japan probably by Teisco
Solid wood body Good used condition, some marks and chips and scuffs and scrapes.
Approx neck pocket width 52 5mm, thin body - 34mm thickness approx
Other parts available in my listings
... more

Early 1960s Watkins Rapier electric guitar neck pickup. From a Rapier 33 but may suit other models
Used condition, as pictured
6 3K ohms on my meter.
Free UK postage
... more

Maxon bass guitar pickup. Circa late 1970s. Looks like a mini humbucker but I think they are single coil inside
As used on Ibanez, Greco and other japanese basses of the era
Good used condition with mounting screws and springs. ome tarnishing and signs of age
Other parts available in my listings
8 4 K ohm on my meter
Free uk shipping
... more

GuitarBrand: TanglewoodModel: TWCR O (Crossroads Series)Body Shape: OrchestraFinish: Whiskey Barrel Burst SatinConstruction: Hand-selected Mahogany Tone: Known for a warm, rich and balanced sound due to its all-mahogany buildPlayability: "Orchestra" body style offers a narrower waist for seating and standing playingUsed, a small dent but overall in excellent conditionCaseWater-repellent black nylon case with foam padding Includes two adjustable backpack-style shoulder trapsHeavy-duty side carry ... more

Vintage Fender Squier Sidekick PR357 Amplifier Guitar Amp Black
Good used condition has a few minor scuffs and some slight rust to the metal but not to bad see photos for overall condition
Fast Free UK postage
... more

Vintage 1960s 70s Satellite 65 / T neck pickup, made in Japan probably by Teisco, other parts in my other listings.
This pickup came from the neck position but I think it would suit any position with this type of pickup
Original part, not a reproduction. Please check the pics to check its the style you require
Used but reasonable condition. Comes with mounting screws. Reads 4 5 K ohms on my meter
84 5 x 30 x 14mm approx (depth not inc pole pieces or mounting brackets)
Other ... more

Westone Electric Guitar Bridge Pickup MMK45 Japan Matsumoku 1985.
11 2 k ohms on my meter
Taken from a Thunder Jet but these pickups were used in other guitars made by Matsumoku and are now reasonably sought after.
I have other parts of this guitar available - see my other listings.
Tarnishing to the pole pieces and general signs of wear to the pickup in general. Comes with mounting screws.
Free UK mainland shipping
... more

Westone Bass Guitar Pickup Japan Matsumoku 1984. Westone info calls these a Hardpuncher pickup
Approx 12 2k ohms on my meter.
Taken from a Concord bass 1 bass and may suit other models ( I have seen very similar looking pickups on the Thunder models also).
I have other parts of this guitar available - see my other listings.
Tarnishing to the pole pieces and general signs of wear to the pickup in general. Comes with mounting screws and springs.
Free UK mainland shipping
... more

Vintage 1960s / 70s Jedson electric guitar telecaster body, made in Japan by Teisco.
Laminate ply body thin body, approx 30mm thickness
It has scuffs, scrapes marks and indents but would be a good base for a project for someone. Overall good condition. I think some of the bridge mounting screws had sheared off when romved, the remnants are wuite deep but I think I can see them in a few of the holes
56mm approx neck pocket width
Other parts available in my listings
... more

Vintage 1960s / 70s Teisco electric bass guitar body but could work for a guitar also, made in Japan and from an Unbranded model but possibly Kawai, Zenta or similar manufacturer.
Its a small body from a short scale bass
Laminate ply body. Used condition, reasonable for age with dings, marks , scuffs and wear
56mm approx neck pocket width
Other parts available in my listings
... more

Vintage 1960s 70s Futurama Sophomore bridge pickup, made in Japan by Guyatone, other parts in my other listings.
This pickup came from the bridge position but I think it would suit any position with this type of pickup
Original part, not a reproduction. Please check the pics to check its the style you require
Used but reasonable condition. Comes with mounting screws. Reads 5 3 K ohms on my meter
74 5 x 22 x 21mm (depth) approx
Other parts available in my listings
... more

Vintage 1960s / 70s Teisco electric guitar body, made in Japan and from a Zenta / Top Twenty / Kawai / Sakai / other brand name guitar.
Laminate ply body. Fair condition, has plenty of marks and chips and scuffs and scrapes.
Approx neck pocket width 57mm, thin body - 32mm thickness approx
Other parts available in my listings
... more

Vintage 1960s Teisco pickup, made in Japan and taken from an unbranded short scale bass guitar , other parts in my other listings.
This pickup came from the neck position but I think it would suit any position with this type of pickup and I'm sure it would work with guitars and basses
Original part, not a reproduction. Please check the pics to check its the style you require
Used but reasonable condition. Comes with mounting bolts and screws. Reads 3 K ohms on my meter
84 x32 x ... more

Vintage 1960s 70s Futurama Sophomore neck pickup, made in Japan by Guyatone, other parts in my other listings.
This pickup came from the neck position but I think it would suit any position with this type of pickup
Original part, not a reproduction. Please check the pics to check its the style you require
Used but reasonable condition. Comes with mounting screws. Reads circa 5 2 K ohms on my meter
74 5 x 22 x 21mm (depth) approx
Other parts available in my listings
... more

Vintage 1960s / 70s Satellite 65T electric guitar body, made in Japan probably by Teisco or other similar manufacturer of that era
Laminate ply body. Generally condition, has some marks, scuffs , scrapes and minor indents.
Approx neck pocket width approx 55 8mm, thin body - 31mm thickness approx
Other parts available in my listings
... more

Vintage JMI Vox Duotone / Soloist guitar bridge with adjustable saddles. May suit other models. Circa 1960s and made in the UK.
Used condition, as pictured. all screws work
Comes with original mounting screws which are tarnished as pictured
Free UK postage

... more

Westone Electric Guitar Neck Pickup MMK45 Japan Matsumoku 1985.
11 1 k ohms on my meter
Taken from a Thunder Jet but these pickups were used in other guitars made by Matsumoku and are now reasonably sought after.
I have other parts of this guitar available - see my other listings.
Tarnishing to the pole pieces and general signs of wear to the pickup in general. Comes with mounting screws.
Free UK mainland shipping
... more

Original 1960s 70s Futurama Sophomore electric guitar tremolo unit / tailpiece , taken from a 1960s guitar made in Japan by Guyatone
Pre owned condition with some tarnishing and some marks. Reasonable overall for age.
No trem arm included. Mounting screws also included. The base plate is approx 80 x 60 mm at the longest points
Other parts available in my listings
... more

Marshall Control Knobs for JMP 1970s Vintage
These are very clean although please examine the photos carefully so you can see the condition of all of them. I purposely haven't cleaned them so they retain all the mojo of original, vintage parts
New knobs on a vintage amp never look right so these are perfect to refurbish your prized possession with genuine vintage replacements
Unfortunately three have lost their caps but all five have their original screws.... more

1972 Vox AC30 Input Jack Array (PCB 72B 3)
Sold as pictured.
... more

Nicola Naccia Napoli Antique Bow Backed Mandolin - Labeled Hutton School Of Music Glasgow
Lovely antique bowl backed mandolin
CONDITION:
Missing bridge and one fret
There are marks on back and some or the panels have a bit f gapping and there is some glue residue suggesting this has had repairs. There is some slight erosion of the wood at the seams
Also signs of a repair on the neck
Some of the back panels move a bit and might need filling in between
Overall there are a... more

This lovely antique grey AXE guitar is a solid-body vintage piece that comes with a carry case for easy transport. Perfect for guitar enthusiasts looking for a unique and classic addition to their collection, this instrument will surely require a wipe down after being stored away for some time. The brand AXE is known for producing high-quality guitars, making this vintage find a desirable option for musicians looking for a vintage feel with modern craftsmanship.... more

Park Control Knobs - 1970s Vintage
A set of seven control knobs from the 1970s
I purposely haven't cleaned them so they retain all the mojo of original, vintage parts
Complete with screws.... more

1960s 70s Teisco Zenta Top Twenty Electric Guitar Ferrules x6
Good condition for its age. This listing is for all six as pictured
Sold as seen. Please see my other listings for more Teisco guitar parts
... more

1960s Eko Texan classical / acoustic guitar tuners.
Brass posts with Nickel tuner casing with Eko logo and off white oval buttons
Used condition, they are aged with light cracks in the buttons which seem stable
Comes with mounting screws. Approx 58mm post spacing centre ( 29mm between each post )
Free UK postage
... more

For sale is this vintage, Gewa, eight stringed Mandolin The instrument is flat bottomed and was made in one of the German states It has a spruce front with fancy fingerboard and a mixed wood back It is eight stringed, but is missing one tuning peg and cog (These are quite cheap on e-bay) The neck looks like it has been reglued and is quite solid There are marks and scratches and a missing string It is 61cms in length P&P to UK is £5 15--To EU it would be £18 00-Anywhere else would be £55 ... more

Vintage 1960s Futurama Sophomore scratchplate / pickguard, made in Japan by Guyatone
Original part, not a reproduction. Please check the pics to check its the style you require.
Used but reasonable condition. Metal plate that is tarnished but may polish up
Mounting screws included. Comes with some original electrics, working but may require servicing
Other parts available in my listings
... more

VINTAGE DI STEFANO ANTONINO MANDOLIN WILL NEED SOME TLC PLEASE VIEW ALL PHOTOS FOR CONDITION AS THEY FORM PART OF THE DESCRIPTION SELLING AS FOUND.... more

Vintage Teisco Jedson telecaster guitar scratch plate / pick guard
Pre owned. Used condition, marks and signs of wear, aged in colour with scratches and pick marks. Comes with original switches but they are untested
As pictured
Free UK postage
... more

Vintage 1960s / 70s Futurama Sophomore electric guitar neck, made in Japan by Guyatone.
Selling as spares / repairs, for parts not working, a project neck. There is too much relief / forward bow and adjustable no truss rod. No returns on this one
It has plenty of scuffs, scrapes marks and minor indents but would be a good project for someone. Probably worth it to someone out there for the headstock badge and the string tree
Approx heel width 55 5mm
Other parts available in... more

Vintage 1960s / 70s Jedson electric guitar telecaster strip tuning heads / machine heads, made in Japan by Teisco. 6 in line , off white plastic buttons.
Used condition with signs of age and tarnishing. They are working and have 25mm post centres
Come with original mounting screws but no ferrules
Other parts available in my listings.
(Ref B)
... more

Early 1960s Watkins Rapier electric guitar knob. From a Rapier 33 but may suit other models
Used condition, as pictured
2 available at the time of listing, price is for 1 knob, please choose quantity required during checkout
Free UK postage
... more

1972 Vox AC30 Fascia Grey Control Panel Plate
Sold as pictured. Measures 21" (533mm) x 2 7 / 8" (73mm)
... more

Original tuning peg from Hofner Senator / Congress / may suit other models
You are buying 1 Old Hofner machine head / tuner.
Treble side ( right handed ) G B or E
We have several available, please choose amount required at checkout. I also have some available for E A or D in my other listings
Please note the botton on the tuner you receive maybe slightly darker in tone than the one shown in the photos Will be flat packed for secure delivery
Free UK shipping. I will ship... more

Original tuning peg from Hofner Congress may suit other models
You are buying 1 Old Hofner machine head / tuner.
Treble side ( right handed ) G B or E
We have three of these available and some with a little more aging in my other listings, please choose amount required at checkout. I also have some available for E A or D in my other listings
Will be flat packed for secure delivery
Free UK shipping. I will ship worldwide
... more

Vintage Teisco Jedson telecaster guitar control plate
Pre owned. Used condition, it has marks and signs of age, I gave it a basic test and it worked but the pots may need rewiring, cleaning or replacing
The colour has aged as pictured, comes with original mounting screws
Free UK postage
... more

Vintage 1960s Teisco scratchplate, made in Japan by Teisco and taken from a ET style guitar, possibly by Kawai , other parts in my other listings
Original part, not a reproduction. Please check the pics to check its the style you require. Three pickup version
Used but reasonable condition. Mini switch added by a past owner
No mounting screws included
Other parts available in my listings
Free UK mainland shipping - usually 48 hrs but not always guaranteed or £8 for next ... more

1980s Vox Standard 25 electric guitar bridge / tremolo unit. Made in Japan by Matsumoku
Comes with mounting screws, springs, claw, as pictured.
Quite heavily tarnished and other signs of use. No arm
56mm string spacing
Free UK postage
... more

1960s 70s Teisco Zenta Top Twenty Electric Guitar Body Japan Resprayed
Body appears to have been resprayed at some point in its life
Sold as seen. Please see my other listings for more Teisco guitar parts
... more

Single original tuning peg from Hofner Senator / Congress / may suit other models
Bass side ( right handed ) E A or D
Possibly the button is a replacement and the button post is slightly bent. I have other old Hofner tuners available in my other listings
Will be flat packed for delivery
Free UK shipping. I will ship worldwide
... more

Here for sale is this Framus acoustic guitar neck plate & long screws, made in W Germany probably in the early 1970s ,used / pre owned condition but generally good
Taken from a Texan 5 / 196 but may suit other models
Some marks, light scuffs and scrapes, and signs of use Check out the pics to gauge size and condition Other parts available in my listings Free UK shipping
... more

Bass guitar control plate from a 1970s Japanese made Eros Jazz bass.
1970s , I have seen the same on basses branded Columbus, CMI, Maya amongst others.
Used condition, some tarnishing and surface wear, pots may need servicing / replacing as I didn't getb the opportunity to test them.
As pictured with mounting screws.
Other parts available in my listings.
Free UK shipping
... more

1960s Eko Texan classical / acoustic guitar pickguard / scratchplate.
Orangey in colour with some crazing to the material
Used condition
Comes with mounting screws
Free UK postage
... more

Westone Concord Bass 1 electric bass guitar scratch plate , From a 1984 guitar made in Japan, may suit other models or part of a project build.
Mounting screws included but tarnished
Aged / Off white finish scratch plate with light marks and signs of age.
Please note this is from the second style Concord Bass 1 , the scrachplate has the curved top edge from as used from late 1982 onwards
Free uk shipping
... more

Vintage 1960s Van Ghent Bass Guitar Machine Head Tuner Burns Framus Hagstrom
Vintage Van Ghent Bass Guitar tuner.
]You are buying 1 tuner for £29 99 (free uk postage).
I have 4 available at the time of listing.
These were used on many 1960s guitars such as Framus, Burns, Hagstrom etc.
No mounting screws included , as pictured. Good overall condition with some signs of use and wear. Light tarnishing and marks.
The one you receive may vary slightly from the one pictured ... more

Early 1960s Watkins Rapier electric guitar strap button. From a Rapier 33 but may suit other models
Used condition, as pictured
2 available at the time of listing, please choose quantity required during checkout
Free UK postage
... more

Vintage Teisco made neckplate (tarnished mounting screws included). Circa 1970s. From a Top Twenty / Zenta type guitar
Pre owned
Used, some scratches and marks and other tarnishing
Free UK postage
... more

1980s Vox Standard neckplate + screws. From a standard bass model but I think this would also fit the guitar models
As pictured, with mounting screws
Used, some marks, scratches and signs of age
Free UK postage
... more

Vintage 1960s Teisco Volume Knob, made in Japan by Teisco as used on certain Teisco made brands such as Guyatone , Kent etc
Gold colour , push fit
Original part, not a reproduction. Please check the pics to check its the style you require
Used but reasonable condition. Lightly tarnished in places
Other parts available in my listings
... more

Vintage 1960s Jedson Telecaster Volume / Tone Knob, made in Japan by Teisco, other parts in my other listings
Original part, not a reproduction. Please check the pics to check its the style you require
Used but reasonable condition. Tarnished in places
2 available at the time of listing. Price is per knob, please choose quantity required at checkout (if available)
Other parts available in my listings
... more

Vintage 1960s Teisco Tone Knob, made in Japan by Teisco as used on certain Teisco made brands such as Guyatone , Kent etc
Gold colour , push fit
Original part, not a reproduction. Please check the pics to check its the style you require
2 available at the time of listing. Price is per knob, please choose quantity required during checkout
Used but reasonable condition. Lightly tarnished in places
Other parts available in my listings
... more

Vintage 1960s Top Twenty Guitar Volume Knob, made in Japan by Teisco, other parts in my other listings
Original part, not a reproduction. Please check the pics to check its the style you require
Used but reasonable condition. Tarnished in places
2 available at the time of listing. Price is per knob
Other parts available in my listings.
... more

Vintage 1960s Futurama Sophomore guitar volume / tone knob, made in Japan by Guyatone , other parts in my other listings
Possibly Bakelite but not 100% on this. Two available at the time of listing, price is for one, please choose quantity required during checkout.
Original part, not a reproduction. Please check the pics to check its the style you require
Used but reasonable condition. Tarnished in places
Other parts available in my listings
... more