Vintage guitars for sale: Cologne

THOMAS MANTA RAY - made in USA :
* if you play in a band . and you are 1 of a KIND =THIS ONE IS FOR YOU !
... more

1965 FENDER JAZZMASTER USA :
* olympic white has turned cream
* lots of finish checking
* matching white headstock
* pickguard has shrunken as usual=check pic 8
* headstock has a small wood chip on back=check last pic
* fingerboard has play wear
* all original parts
* plays & sounds like a CHAMP !... more

1965 FENDER JAZZMASTER USA :
* olympic white has turned cream
* lots of finish checking
* matching white headstock
* pickguard has shrunken=check last pic
* headstock has a small wood chip on back=check pic 9
* fingerboard has play wear=check pic 7
* all original parts
* plays & sounds like a CHAMP !
... more

1977 TRAVIS BEAN TB 4000 BASS - made in USA :
* finished in a rare METALLIC BLUE (probably the ONLY ONE worldwide), NOT black as it may appear from far
* finish is nitro and has some weather checking
* has some laquer chips and dents
* neck has a few scratches
* frets are clean
* original brown case is included
* VERY HARD TO FIND !... more

1969 Fender Stratocaster MAPLE CAP NECK - made in USA:
* new frets
* new nut
* fingerboard leveled for a slightly flatter radius, new finish on front
* small epoxy repair at end of fingerboard(wood chip)=check PIC 6
* original F tuners & string tree
* plays perfect
* VERY HARD TO FIND !
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>... more

1958 FENDER STRATOCASTER MAPLE NECK - made in USA :
* has a nice comfy C shape, NOT fat
* was refinished about 15 years ago including new decal
* refretted
* a very faint 58 is still visible at butt end
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>... more

1957 FENDER ESQUIRE MAPLE NECK USA :
* refretted
* oversprayed with nitro
* comfy C shape
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>... more

1959 GIBSON ES 345 USA - PROJECT :
* spray can refin, label oversprayed in red
* Mickey Mouse ears
* beefy neck version
* lower f-hole was routed, but rout will be covered with a longer pickguard=check pic 4
* label inside is oversprayed in red
* neck binding is loose=check pic 6
* right headstock tip has a small chip
* small seam seperation of one headstock wing at G tuner on back only=check pic 11
* tuner holes enlarged
* old wood=seasoned TONE
* SOLD AS IS - ... more

1969 FENDER STRATOCASTER BODY USA :
* extremely rare late '69 CANDY APPLE RED finish that has faded into a lighter red
* has a lot of weather checking
* also lots of finish touch ups all over
* SOLD AS IS - NO RETURNS... more

1952 FENDER TELECASTER - made in USA :
* body has oversanding, extra screw holes, cracks at neck pocket, neck pickup cavity slightly routed and filled
* neck has a new trussrod and BIGGER frets installed, cracks around skunk stripe=check pic 11 & 12 had a bigger nut installed(now repaired), also 4 small holes in fingerboard at 17th & 21st fret =check pic 8, neck was sanded down a bit=overall about 1 mm is missing from nut to the neck end, NOT a baseball neck profile anymore ... more

1966 FENDER JAZZ BASS :
+ finished in candy apple red, has lots of weather checking
+ matching red headstock
+ back was sanded partially off by some lunatic
+ frets are worn, but play fine
+ all original parts
+ light weight
+ plays & sounds like a CHAMP !... more

1952 FENDER TELECASTER - made in USA :
* body has oversanding, extra screw holes, cracks at neck pocket, neck pickup cavity slightly routed and filled
* neck has a new trussrod and BIGGER frets installed, cracks around skunk stripe=check pic 11 & 12 had a bigger nut installed(now repaired), also 4 small holes in fingerboard at 17th & 21st fret =check pic 8, neck was sanded down a bit=overall about 1 mm is missing from nut to the neck end, NOT a baseball neck profile anymore ... more

1969 FENDER STRATOCASTER USA :
* body refinished(spray can job), has a lot of wear under the new paint
* some oversanding around neck plate
* neck has an older refret and an extra rout at butt end (not visible when mounted)
* nice chunky neck profile
* additional tuner screw holes(only 1 is visible)
* pickguard has a filled mini switch hole
* new pots, switch & knobs
* pickups are rewound
* plays & sounds like a CHAMP !... more

1969 Gibson Les Paul Custom:
* 1 PIECE mahogany body finished in original piano black, has scratches / dings / dongs
* refinished mahogany neck with repaired headstock break, some binding replaced on front, no volute, serial number in the 851 000 range, headstock angle is slightly straighter than it was originally due to the repair=check last 2 pics
* ebony fingerboard with brandnew larger frets installed
* new nut & blank trussrod cover
* new waffle back tuners in ... more

1963 FENDER STRATOCASTER BODY - made in USA :
* NITRO REFIN
* sounds like a CHAMP !
* SOLD AS IS - NO RETURNS
FYI:
Stratocasters had variable body date positions. Usually they are seen in the rear tremolo cavity (if the Strat is a tremolo model!). But it is also common for the body date to be under the middle pickup. For all models, by about 1963 or 1964, body dates were rarely used
... more

1965 FENDER STRATOCASTER NECK :
* chunky feel on back
* finish on back has play wear
* older frets with play wear
* golden logo has an additional blue FEND misprint over it, looks original=a misprint
* has 2 minor cracks around tuner holes, probably from hitting a cymbal=check last 5 pics
* A KILLER PLAYER !
PLENTY of PARTS for SALE
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT ... more

1969 Gibson Les Paul Custom:
* 1 PIECE mahogany body finished in original piano black, has scratches / dings / dongs
* refinished mahogany neck with repaired headstock break, some binding replaced on front, no volute, serial number in the 851 000 range, headstock angle is slightly straighter than it was originally due to the repair=check last 2 pics
* ebony fingerboard with brandnew larger frets installed
* new nut & blank trussrod cover
* new waffle back tuners in gold... more

1969 Gibson Les Paul Custom:
* 1 PIECE mahogany body finished in original piano black, has scratches / dings / dongs
* refinished mahogany neck with repaired headstock break, some binding replaced on front, no volute, serial number in the 851 000 range, headstock angle is slightly straighter than it was originally due to the repair=check last 2 pics
* ebony fingerboard with brandnew larger frets installed
* new nut & blank trussrod cover
* new waffle back tuners in gold... more

1962 FENDER STRATOCASTER NECK - made in USA :
* neck was painted over completely in BLACK before
* now refinished in natural, has wear (dings& dents) UNDER the new paint
* new logo
* refretted with a SLIGHTLY flatter radius
* side dots were redrilled while neck was black and there are some DOUBLE DOTS in the upper register=check last pic
* tuner holes are enlarged
* extra tuner screw holes on back
* has cracks around tuner holes=check pic 10
* last dot was sanded ... more

1969 FENDER STRATOCASTER MAPLE CAP NECK USA:
* was scalloped and brought back to life with a thick curved maple cap=chunky neck profile
* has lots of extra locking nut screw holes behind nut=check pic 8
* jumbo frets are installed
* Fender F tuners
* 1969 Fender neck plate, very rusty

---------------------------> ALL OTHER PARTS ARE NEWER ! <---------------------
... more

1969 FENDER STRATOCASTER BODY :
* humbucker rout at bridge
* shielding paint added
* top coat was oversprayed
* A TONE MACHINE !
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
PLENTY of PARTS for SALE
... more

1970 FENDER STRATOCASTER USA NECK :
* headstock face has turned amber
* date at butt has faded
* finish has wear
* refretted
* a larger nut was installed for MORRREEEEE SUSTAIIIINNNN
* nice chunky profile
* F tuners are included
PLENTY of PARTS for SALE
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
... more

1964 FENDER JAZZMASTER BODY - made in USA :
* CUSTOM ART PIECE by RICK BLACK
* UNIQUE !
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
PLENTY of PARTS for SALE
... more

1958 FENDER PRECISION BASS NECK - made in USA :
* dated 4 - 58
* completely refinished by the previous owner with a BRUSH
* has an older REFRET with wear
* original tuners are included
* WIIIIIIDDDE NECK PROFILE
* plays like a CHAMP !
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1958 FENDER PRECISION BASS NECK - made in USA :
* dated 4 - 58
* completely refinished by the previous owner with a BRUSH
* has an older REFRET with wear
* original tuners are included
* WIIIIIIDDDE NECK PROFILE
* plays like a CHAMP !
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1952 FENDER TELECASTER BODY - made in USA :
* refinished
* uneven drilled body ferrules as usual for early Teles
* some oversanding around neck pocket
* neck pickup rout was made larger for a pedal steel pickup
* extra screw holes at jack input
* 52 date partially visible in neck pocket=check last pics
* SOLD AS IS - NO RETURNS... more

1985 JACKSON CUSTOM HEADLESS SOLOIST :
* 1 of 2 ever produced
* finished in sonic blue
* serial number J 11xx
* custom made for a well known HOUSTONIAN GUITAR SLINGER
* missing parts
* newer pots
* has 1 laquer chip & a few dings
* SUPER RARE
... more

1969 FENDER STRATOCASTER BODY :
* humbucker rout at bridge
* shielding paint added
* top coat was oversprayed
* A TONE MACHINE !
SOLD AS IS - NO RETURNS
... more

1963 FENDER STRATOCASTER NECK - made in USA :
* original decal & finish
* newer frets
* some grooves into the wood around first 3 frets
* comfy C shape, NOT fat
* HEADSTOCK TOP HAD A DISPUTE WITH A DRUM CYMBAL=SMALL WOOD REPAIR
* CHECK PICS 7 - 11 for repair details=hardly visible from 1 foot away
* SOLD AS IS - NO RETURNS
... more

1966 FENDER STRATOCASTER NECK:
* refretted
* finish has wear & weather checking
* extra tuner screw holes on back=check pic 8
* tiny crack at one of the neck plate screw holes=check last 2 pics
* nice chunky C profile... more

CONSIGNMENT SALE -
1959 FENDER TELECASTER NECK - made in USA :
* completely refinished
* new logo
* fingerboard has some grooves down to fret no. 9
* refretted with bigger frets
* filled extra tuner screw holes on back
* had 3 cracks around first 4 tuners, a dowel is placed on headstock side & a wood strip was placed from tuner 4 down to the
headstock curve=check last 6 pics=rock solid
* headstock was sanded a bit thinner in the repair process=check last pic
*... more

CONSIGNMENT SALE -
1963 FENDER STRATOCASTER NECK - made in USA :
* headstock face refinished plus new logo
* headstock is a bit thinner than usual
* has some tiny cracks between tuner screw holes=check pic 6
* 3 small wood chips at neck plate screw holes
* some grooves in fingerboard=check last pics
* refretted
* nut width is 41 mm
* comfy C shape, NOT fat... more

1964 FENDER JAZZ BASS BODY - made in USA :
* finish is very worn
* has a filled rout around bridge=check pic 6
* NO bridge included
* neck pocket sanded clean for a better body / neck contact
* MAJOR MOJO TO GO
* TONE MACHINE !
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

CONSIGNMENT SALE -
1967 FENDER STRATOCASTER NECK - made in USA :
* original finish & logo, worn
* refretted
* has a chunk of wood missing behind fret 5=check pic 9
* previous owner Blind Willie McHammer marked all the side dots up to the 17th fret in his typical style=check last 3 pics
* new nut
* original tuner ferrules are included
* has a chunky C shape... more

1966 FENDER PRECISION BASS NECK USA :
* finish has tons of weather checking
* some finish chips
* new frets are installed
* plays like a CHAMP !
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!
... more

1964 FENDER JAZZ BASS BODY - made in USA :
* finish is very worn
* has a filled rout around bridge=check pic 6
* NO bridge included
* neck pocket sanded clean for a better body / neck contact
* MAJOR MOJO TO GO
* TONE MACHINE !
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1965 FENDER STRATOCASTER BODY:
* was routed by some moron for lefty use
* was repaired by a wood artist
* needs finish touch up
* SOLD AS IS - NO RETURNS... more

1971 Fender Jazz Bass - made in USA :
* alder body finished in 3 tone sunburst, has some wear
* maple neck with rosewood fingerboard
* frets are excellent
* neck stamp has faded(only 06 71 A can be seen)
* compared to later models, neck has a FAT profile
* original grey bottom pickups(stamped 9311 & 0201)
* original nickel tuners
* original pickguard - HAS 4 ADDED SCREWS on right tip side
* original long G string saddle bridge
* 2 original pots(16th week ... more

1971 Fender Jazz Bass - made in USA :
* alder body finished in 3 tone sunburst, has some wear
* maple neck with rosewood fingerboard
* frets are excellent
* neck stamp has faded(only 06 71 A can be seen)
* compared to later models, neck has a FAT profile
* original grey bottom pickups(stamped 9311 & 0201)
* original nickel tuners
* original pickguard - HAS 4 ADDED SCREWS on right tip side
* original long G string saddle bridge
* 2 original pots(16th week ... more

1967 FENDER TELECASTER BASS MAPLE CAP NECK :
* prototype
* logo oversprayed
* newer frets
* fingerboard and back also oversprayed
* dots number 7 & 9 appear to be BROWN-ish, not black=check last pic
* super nice FLAME FIGURING on back
* SUPER RARE MAPLE CAP VERSION
* neck is perfectly straight with strings on
* tuner bushings are included
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!
... more

1966 FENDER PRECISION BASS BODY USA :
* red colour on front side has faded, almost a 2 tone colour
* lots of wear around the body edges
* original pickguard, bridge, 1966 pots & knobs are included
* SEASONED TONE MACHINE !
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!
... more

1974 FENDER STRATOCASTER - made in USA:
* well worn in
* looks & sounds like a CHAMP !
... more

1968 GIBSON SG STANDARD - made in USA
* body & neck finished in original black, lots of wear
* long heel / large headstock design
* narrow neck width version, 40 mm at nut
* has 3 minor unrepaired cracks at body edge through the control cavity (last 2 pics)
* D & G tuners are slightly bent
* 2 original PAT No. humbuckers
* original Vibrola tremolo, arm is hanging loose
* pickguard is missing the left top tip
* control cavity cover has a crack in the ... more

1968 GIBSON SG STANDARD - made in USA
* body & neck finished in original black, lots of wear
* long heel / large headstock design
* narrow neck width version, 40 mm at nut
* has 3 minor unrepaired cracks at body edge through the control cavity (last 2 pics)
* D & G tuners are slightly bent
* 2 original PAT No. humbuckers
* original Vibrola tremolo, arm is hanging loose
* pickguard is missing the left top tip
* control cavity cover has a crack in the ... more

1954 FENDER TELECASTER BODY USA :
* refinished, has lots of weather checking
* had a Bigsby installed=2 filled holes at bridge are visible
* some oversanding around neck pocket, lip is gone
* some routing in control cavity
* ash=NOT light
* 70 years old wood=TONE !

ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
PLENTY of PARTS for SALE... more

1964 FENDER PRECISION BASS NECK USA :
* refinished, has a lot of laquer chips
* newer frets
* plays like a CHAMP !... more

CONSIGNMENT SALE -
1964 FENDER STRATOCASTER NECK - made in USA :
* completely refinished
* new logo
* headstock has 6 DOWELED HOLES from a 12 string conversion=thank you, THE BYRDS
* refretted
* new nut
* has a comfy C shape, NOT fat... more

1971 Fender Jazz Bass - made in USA :
* alder body finished in 3 tone sunburst, has some wear
* maple neck with rosewood fingerboard
* frets are excellent
* neck stamp has faded(only 06 71 A can be seen)
* compared to later models, neck has a FAT profile
* original grey bottom pickups(stamped 9311 & 0201)
* original nickel tuners
* original pickguard - HAS 4 ADDED SCREWS on right tip side
* original long G string saddle bridge
* 2 original pots(16th week ... more

1971 Fender Jazz Bass - made in USA :
* alder body finished in 3 tone sunburst, has some wear
* maple neck with rosewood fingerboard
* frets are excellent
* neck stamp has faded(only 06 71 A can be seen)
* compared to later models, neck has a FAT profile
* original grey bottom pickups(stamped 9311 & 0201)
* original nickel tuners
* original pickguard - HAS 4 ADDED SCREWS on right tip side
* original long G string saddle bridge
* 2 original pots(16th week ... more

1969 FENDER LEFT HAND STRATOCASTER MAPLE CAP NECK - made in USA :
* was super deep scalloped by the previous owner
* now back to life with 2 layers of maple
* tuner holes were made wider
* extra tuner screw holes on back of headstock
* 2 filled locking nut screw holes=check pic 6
* brandnew frets installed
* has a NICE CHUNKY C shape
* plays like a CHAMP !
PLENTY of PARTS for SALE
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS ... more

1968 FENDER PRECISION BASS NECK - made in USA:
* refretted
* comfy C shape=NOT fat
* well worn in
* A KILLER PLAYER
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

CONSIGNMENT SALE:
1968 GIBSON SG STANDARD - made in USA
* body & neck finished in original black, lots of wear
* long heel / large headstock design
* narrow neck width version, 40 mm at nut
* has 3 minor unrepaired cracks at body edge through the control cavity (last 2 pics)
* D & G tuners are slightly bent
* 2 original PAT No. humbuckers
* original Vibrola tremolo, arm is hanging loose
* pickguard is missing the left top tip
* control cavity cover ... more

1964 FENDER JAGUAR - made in USA :
* body refinished, worn
* neck refinished
* handpainted FENDER logo
* frets are replaced & fine
* new mint green pickguard
* new turners
* 2 new pots
* missing 2 pot knobs
* low action
* plays & sounds GR 8 !
... more

1965 FENDER JAZZMASTER NECK USA :
* rare transition model with smaller headstock style, dots & binding=was only made for 4 months
* refretted & new nut
* original finish was painted over
* chunky neck profile
* repro tuners are included... more

1966 FENDER STRATOCASTER USA BODY :
* refinished in natural, front has a tan color from club smoke
* lots of finish checking=nitro laquer
* 3 dowels are placed in tremolo screw holes
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
PLENTY of PARTS for SALE
... more

1968 GIBSON ES 335 -- 12 STRING -- made in USA:
* maple body finished in candy apple red, FRONT has faded into a BRONZE colour, has laquer checking & wear
* mahogany neck with rosewood fingerboard, has also laquer wear, frets are fine, NARROW NECK PROFILE
* 2 Patent No. humbucker pickups
* chrome hardware
* new switch tip & pot knobs
* low action
* sounds & plays PERFECT !
... more

1964 FENDER TELECASTER BODY - made in USA :
* nice grain ash
* has some deeper wear into the grain on back=check last pic
* 59 YEARS OLD WOOD=TONE !
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
PLENTY of PARTS for SALE
... more

1958 FENDER PRECISION BASS BODY - made in USA :
* refinished in natural
* TONE MACHINE !
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1968 FENDER MAPLE CAP TELECASTER THINLINE NECK - made in USA :
* came off a Fender Telecaster Thinline model
* new TELECASTER decal applied
* factory stamped at heel ABOVE neck plate : DEMO=check pics 1 & 2
* fingerboard refinished
* refretted
* additional tuner screw holes on back of headstock
* low E tuner bushing is missing

PLENTY of PARTS for SALE
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT... more

1959 GIBSON LES PAUL STANDARD CASE by LIFTON :
* 5 latches
* handle is worn
* pink interior has stains
* black pattern texture on the brown tolex is worn off in some places=check pics 7 - 10
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1963 FENDER PRECISION BASS BODY - made in USA :
* has a reglued seam around bridge=check last 5 pics
* lots of MOJO to GO
* sounds like a CHAMP !
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!
... more

1963 FENDER PRECISION BASS BODY - made in USA :
* has a reglued seam around bridge=check last 5 pics
* lots of MOJO to GO
* sounds like a CHAMP !
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!
... more

1968 FENDER TELECASTER MAPLE CAP NECK - made in USA :
* newer frets installed plus fingerboard refin
* additional tuner screw holes on back
* has a super nice PLAYED IN feel !... more

1977 Fender Starcaster -- made in USA:
+ maple body finished in natural, has lots of cool play wear
+ maple neck, new frets, fingerboard has also lots of real play wear
+ 2 humbuckers
+ all original parts, except for changed bridge saddles & new frets
+ low action
+ plays & sounds GR 8 !
... more

1969 FENDER LEFT HAND STRATOCASTER MAPLE CAP NECK - made in USA :
* was super deep scalloped by the previous owner
* now back to life with 2 layers of maple
* tuner holes were made wider
* extra tuner screw holes on back of headstock
* 2 filled locking nut screw holes=check pic 6
* brandnew frets installed
* has a NICE CHUNKY C shape
* plays like a CHAMP !
... more

1964 FENDER TELECASTER BODY - made in USA :
* nice grain ash
* has some deeper wear into the grain on back=check last pic
* 59 YEARS OLD WOOD=TONE !
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
PLENTY of PARTS for SALE
... more

1955 GIBSON LES PAUL STANDARD CASE by LIFTON :
* 4 latches
* tolex has rips
* lots of wear around the edges
* pink interior has wear
* black pattern texture on the brown tolex is worn off in one spot=check last pic
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1968 FENDER TELECASTER USA MAPLE NECK :
* maple cap version
* brass nut
* tuner holes were made larger
* extra tuner screw holes on back
* refretted, frets have wear
PLENTY of PARTS for SALE
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
... more

1975 FENDER Precision Bass - made in USA:
* alder body finished in white=turned into banana now, tons of cool play wear
* FAT maple neck with rosewood fingerboard, frets are fine
* neck date has faded, there's a long scratch at end of neck around the pickguard line why=?
* original neck plate in the 640 000 range
* original bridge
* original F tuners are rusty
* original grey bobbin single coil pickup, no date visible
* new pickguard, pots, cap & knobs
* low ... more

1963 FENDER STRATOCASTER BODY - made in USA :
* was original lake placid blue
* the bowling ball colour appears to be inlaid=check last 3 pics, there are numerous layers of paint
* UNIQUE !... more

1968 FENDER PRECISION BASS NECK - made in USA:
* refretted
* comfy C shape=NOT fat
* well worn in
* A KILLER PLAYER !
... more

1964 FENDER JAGUAR - made in USA :
* body refinished, worn
* neck refinished
* handpainted FENDER logo
* frets are replaced & fine
* new mint green pickguard
* new turners
* 2 new pots
* missing 2 pot knobs
* low action
* plays & sounds GR 8 !
... more

1971 MARSHALL MAJOR 200 WATTS AMP :
* LEAD version
* currently set on 220 volts
* tubes are 6550
* back plate is missing
* tolex has wear, some patches here & there
* corners are worn through to the wood
* new plastic feet added on bottom
* fixed power cable
* sounds fine !... more

1967 FENDER TELECASTER NECK:
* maple cap version
* refinished in an orange hue
* headstock finish removed
* second string tree screw hole
* refretted
* tuner holes enlarged
* has additional tuner screw holes

Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !
... more

1977 Fender Starcaster -- made in USA:
+ maple body finished in natural, has lots of cool play wear
+ maple neck, new frets, fingerboard has also lots of real play wear
+ 2 humbuckers
+ all original parts, except for changed bridge saddles & new frets
+ low action
+ plays & sounds GR 8 !
... more

1974 GIBSON HOWARD ROBERTS CUSTOM - made in USA:
* body and back of neck have laquer wear
* hardware has patina
* pickguard has a crack
* tail piece is missing the HR logo
* BRAND NEW FRETS INSTALLED
* plays & sounds like a CHAMP !
... more

1957 FENDER STRATOCASTER TREMOLO USA :
* most saddle height screws are replaced
* chrome is worn
* trem arm thread has a bit of wear but tightens up
* nothing else is included
... more

1959 FENDER STRATOCASTER TOLEX CASE - made in USA :
* orange interior, has stains & wear
* the leather piece for opening the strings compartment is gone
* brown tolex is actually in pretty good shape
* leather ends are VERY WORN =check last 5 pics
* both latches have dead springs
* handle is just plain metal=leather is gone
* 2 feet are missing on side=check last pic
* 1 foot is slightly pushed in
* this type of case was only made for 2 years=super hard to ... more

1966 FENDER STRATOCASTER USA BODY :
* finish is stripped
* has some chiseling under the pickguard=check pick 8
* has A MILLION small dents into the wood ALL OVER from ???=check pic 10 & 11
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
PLENTY of PARTS for SALE
... more

1958 GIBSON LES PAUL SPECIAL USA - PROJECT :
* completely refinished
* stop tail piece conversion
* has minor stress cracks in cutaways=check last 2 pics
* neck was shaved and made a bit slender by previous owner=NOT a chunky neck profile anymore
* neck binding removed on both sides=nut width is just about 41 mm
* ALL ORIGINAL PARTS HAVE BEEN CHANGED OUT OVER THE YEARS
* old mahogany=TONE
* add your choice of pickups & this semi-retired rocker will be ready to ... more

1958 GIBSON LES PAUL SPECIAL USA - PROJECT :
* completely refinished
* stop tail piece conversion
* has minor stress cracks in cutaways=check last 2 pics
* neck was shaved and made a bit slender by previous owner=NOT a chunky neck profile anymore
* neck binding removed on both sides=nut width is just about 41 mm
* ALL ORIGINAL PARTS HAVE BEEN CHANGED OUT OVER THE YEARS
* old mahogany=TONE
* add your choice of pickups & this semi-retired rocker will be ready to ... more

1968 GIBSON SG STANDARD / CUSTOM - made in USA :
* original rout for 3 humbuckers under the pickguard
* refinished in matte natural
* converted to a stop tail piece, tremolo holes are filled
* all parts are newer
* 40 mm nut width
* new frets
* 2 unbranded ZEBRA humbuckers
* long heel & small headstock version
* has a minor stress crack repair below tuners=check last 2 pics
* old mahogany=TONEEEEE
* needs electronics back plate, truss rod cover & ... more

1981 TOKAI REBORN LP - made in Japan :
* 2 piece mahogany body, has lots of wear on back
* used to be a GOLD TOP P 90 model
* awesome tiger flame re-top, finished with NITRO in a faded sunburst, has a lots of fine weather checking
* chunky neck profile
* weighs 4, 1 kilos=SUSTAIN for DAYS
* dying to receive a brandnew FACE LIFT
* 42 years old seasoned wood=TONE MACHINE !... more

1964 FENDER PRECISION BASS BODY :
* refinished in banana yellow over a white refin=spray can job
* NO clear overspray=will RELIC within 3 months
* neck pocket lip is oversanded=check last pic
* old wood=TONE MACHINE !
... more

1971 FENDER TELECASTER MAPLE NECK :
* refretted
* finish has wear
* extra tuner screw holes on back
* an extra string tree was added
* CHUNKY profile=similar to a '56
PLENTY of PARTS for SALE
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
... more

1969 GIBSON EB 1 VIOLIN BASS:
* mahagony body, has wear* mahogany neck with rosewood fingerboard, frets are fine* original humbucker pickup at neck* additional Telecaster single coil pickup at bridge* new trussrod cover* low action* plays & sounds like a CHAMP !
... more

1971 FENDER TELECASTER MAPLE NECK:
* headstock front has turned amber
* additional tuner screw holes on back
* has laquer wear
* refretted & refinished fingerboard, also leveled to a flatter profile=easier to bend strings
PLENTY of PARTS for SALE
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
... more

1972 FENDER STRATOCASTER LEFT HAND NECK - made in USA :
* finish is very worn
* frets are replaced
* has 2 additional screw holes at heel
* F tuners are included
* tons of MOJO to go .
... more

1971 FENDER TELECASTER USA NECK :
* finish on fingerboard removed
* finish on back mostly worn off
* taller frets installed
* extra tuner screw holes on back of headstock
* chrome F tuners are included
PLENTY of PARTS for SALE
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
... more

1964 FENDER JAZZ BASS BODY - made in USA :
 * refinished in metallic red
* TONE MACHINE !
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!8I
... more

1969 GIBSON EB 1 VIOLIN BASS:
* mahagony body, has wear* mahogany neck with rosewood fingerboard, frets are fine* original humbucker pickup at neck* additional Telecaster single coil pickup at bridge* new trussrod cover* low action* plays & sounds like a CHAMP !
... more

1979 FENDER STRATOCASTER - made in USA:
* heavy ash body finished in sunburst, has only a few dings and scratches
* maple neck with rosewood fingerboard, frets are excellent
* no tremolo version
* all original parts
* low action
* sweet tone !
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>
... more

1968 GIBSON SG STANDARD / CUSTOM - made in USA :
* original rout for 3 humbuckers under the pickguard
* refinished in matte natural
* converted to a stop tail piece, tremolo holes are filled
* all parts are newer
* 40 mm nut width
* new frets
* 2 unbranded ZEBRA humbuckers
* long heel & small headstock version
* has a minor stress crack repair below tuners=check last 2 pics
* old mahogany=TONEEEEE
* needs electronics back plate, truss rod cover & knobs... more

1958 GIBSON LES PAUL SPECIAL USA - PROJECT :
* completely refinished
* stop tail piece conversion
* has minor stress cracks in cutaways=check last 2 pics
* neck was shaved and made a bit slender by previous owner=NOT a chunky neck profile anymore
* neck binding removed on both sides=nut width is just about 41 mm
* ALL ORIGINAL PARTS HAVE BEEN CHANGED OUT OVER THE YEARS
* old mahogany=TONE
* add your choice of pickups & this semi-retired rocker will be ready to ... more

1964 FENDER JAZZ BASS BODY - made in USA :
* some oversanding around neck pocket=check pic 7
* refinished in metallic red, has some small laquer chips
* original candy apple red finish is still present ln pickup cavities
* TONE MACHINE !... more

1964 FENDER TELECASTER BODY - made in USA :
* alder body refinished in banana yellow, rough spray can job=will relic within 3 months
* some oversanding around neck pocket=check last pic
* TONE MACHINE !... more

1981 TOKAI REBORN LP - made in Japan :
* 2 piece mahogany body, has lots of wear on back
* used to be a GOLD TOP P 90 model
* awesome tiger flame re-top, finished with NITRO in a faded sunburst, has a lots of fine weather checking
* chunky neck profile
* weighs 4, 1 kilos=SUSTAIN for DAYS
* dying to receive a brandnew FACE LIFT
* 42 years old seasoned wood=TONE MACHINE !... more

1961 GIBSON SG JUNIOR - made in USA :
* compeletely refinished(spray can) including headstock front
* repaired cracks at body / heel plus headstock below low E tuner=check pics 9 & 10
* wide 43 mm nut
* long neck tenon
* extra tail piece studs are mounted
* original P 90 pickup & 1 x 1961 pot are included=NOTHING ELSE
* SOLD AS IS - NO RETURNS... more

1967 RICKENBACKER 4005 Bass - made in USA - PROJECT :
* body & neck ONLY
* fingerboard was sanded down
* needs a new fingerboard & body routs filled & parts
* some original parts of it are offered in our EBAY SHOP
* original 4005 basses are selling for 11 000 Euros
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1969 FENDER TELECASTER USA MAPLE NECK:
* headstock has a reglued crack through logo up to the high E tuner=check last 4 pics
* frets have wear
* finish has EXTRA heavy wear
* SCHALLER tuners installed
* 19th dot is partly missing=check pic 2
* nut is also missing
PLENTY of PARTS for SALE
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
... more

1963 FENDER JAZZMASTER BODY - made in USA :
* refinished in torino red with NITRO
* has lots of fine weather checking
* has a few cracks around pickguard screw holes
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
PLENTY of PARTS for SALE
... more

1963 FENDER JAGUAR NECK - made in USA :
* original finish including headstock was oversprayed
* tuner holes were made larger
* extra tuner screw holes are on back
... more

1965 FENDER JAGUAR NECK - made in USA :
* white binding
* frets are fine
* has a small wood chip behind nut
... more

60's Epiphone by Gibson Embassy Deluxe Bass - made in USA:
+ mahogany body finished in wine red, has lots of weather checking and wear, several extra screw holes on back
+ mahogany neck with rosewood fingerboard, LONG SCALE, has 4 minor SURFACE stress cracks below tuners=check last 3 pics
* skinny neck profile on back around first 5 frets
+ new Fender Reissue tuners
+ 1 original THUNDERBIRD pickup & 1 newer Fender Jazz bass single coil
+ new pickguard
+ new pots and ... more

1965 EPIPHONE WILSHIRE - made in USA :
* finished is stripped, original inverness green still visible in cavities
* small patch of wood on back=check pic 6
* serial number is faint
* no other parts included
* A FEATHER WEIGHT !
++PLENTY of PARTS for SALE ++
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>
... more

1971 FENDER TELECASTER MAPLE NECK - made in USA :
* headstock face has turned oxblood red !
* finish is very worn
* frets have wear
* small extra dot / hole at end of fingerboard
* has a real nice chunky profile !
---------
PLENTY of PARTS for SALE
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
... more

1964 FENDER PRECISION BASS BODY USA :
* refinished, spray can job
* has a lot of weather checking
* TONE MACHINE !... more

1972 FENDER STRATOCASTER LEFT HAND NECK - made in USA :
* finish is very worn
* frets are replaced
* has 2 additional screw holes at heel
* F tuners are included
* tons of MOJO to go ..... more

1964 FENDER JAZZMASTER BODY - made in USA :
* thick poly refin
* has some larger laquer cracks=check all pics
* 59 YEARS OLD WOOD=TONE !
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
PLENTY of PARTS for SALE
... more

1981 CHARVEL SAN DIMAS BODY with HOT ROD GRAPHICS - made in USA - PRE PRODUCTION:
* mahagony body=heavy
* had a 1 - 7 - 81 dated San Dimas neck (already sold)
* back control rout is of the RARE EARLY STYLE as on George Lynch's bengal tiger model=check last pic
* check all pics
... more

1971 FENDER PRECISION BASS NECK - made in USA :
* super rare A size=40 mm at nut !
* finish has a wear=check pics
* frets are fine
* VERY HARD TO FIND !
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1975 Fender Stratocaster -- made in USA -- LIGHT WEIGHT:
* alder body finished in original mocca brown(custom colour), has some paint chips around the edges, lots of weather checking (NITRO !)
* maple neck with rosewood fingerboard, frets are excellent
* 3 x FENDER TEX MEX pickups
* original block saddles tremolo
* original black plastic parts
* SCHALLER M 6 tuners installed
* new pots & switch
* low action
* sounds & plays perfect !
... more

60's Epiphone by Gibson Embassy Deluxe Bass - made in USA:
+ mahogany body finished in wine red, has lots of weather checking and wear, several extra screw holes on back
+ mahogany neck with rosewood fingerboard, LONG SCALE, has 4 minor SURFACE stress cracks below tuners=check last 3 pics
* skinny neck profile on back around first 5 frets
+ new Fender Reissue tuners
+ 1 original THUNDERBIRD pickup & 1 newer Fender Jazz bass single coil
+ new pickguard
+ new pots and ... more

1960 EPIPHONE by GIBSON MELODY MAKER USA :
* refinished
* NO neck breaks
* 42 mm wide neck profile=same specs as 50's Les Paul Junior & FLYING V fingerboards
* 5 fingerboard dots are replaced
* bridge stud holes were filled for a tunematic conversion
* original pickguard & pickup
* new pots
* new tuners
* old mahogany=TONE... more

1968 GIBSON SG MELODY MAKER :
* NARROW 40 mm nut width
* SMALL headstock design
* GROVER tuners installed
* had a MINOR HEEL REPAIR
=CHECK LAST 4 PICS
* old mahogany=TONE
* just add your fave humbucker pickups and
she is ready to roll
... more

FENDER STRATOCASTER USA - LEFT HAND :
* made in 1978
* heavy ash body=great sustain
* maple neck
* frets have light wear
* upgraded with an early Floyd Rose tremolo
* 1 OBL rail humbucker plus 2 newer single coils installed
* new pickguard, pots, switch & plastic parts
* low action
* ROX OUT !
... more

1965 EPIPHONE WILSHIRE - made in USA :
* finished is stripped, original inverness green still visible in cavities
* small patch of wood on back=check pic 6
* serial number is faint
* no other parts included
* A FEATHER WEIGHT !
... more

1965 EPIPHONE WILSHIRE - made in USA :
* finished is stripped, original inverness green still visible in cavities
* small patch of wood on back=check pic 6
* serial number is faint
* no other parts included
* A FEATHER WEIGHT !
... more

1969 FENDER PRECISION BASS NECK - made in USA :
* finish has light wear
* frets are in good shape
* has some extra screw holes at heel=check last pic
* neck is straight
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1963 FENDER JAZZMASTER BODY - made in USA :
* refinished in burgundy mist metallic with NITRO
* has some fine weather checking
* some small scratches & chips
* light oversanding around neck pocket
* TONE MACHINE !... more

1981 Charvel San Dimas Str t -- made in USA:
* alder body refinished in kinda reversed purpleburst, has a larger laquer crack on front of body, closed Floyd post holes near bridge neck pocket was slightly lowered
* maple neck with rosewood fingerboard, had a locking nut installed, filled holes on front & back of headstock (oversprayed), 4 extra filled screw holes at heel, frets are excellent, '81 neck date
* 1 DiMarzio DISORTION humbucker
* Kluson tuners installed
* ... more

1969 FENDER PRECISION BASS NECK - made in USA :
* finish is worn
* frets are in good shape
* neck is straight
* a KILLER PLAYER !
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1969 FENDER PRECISION BASS NECK - made in USA :
* finish is worn
* frets are in good shape
* neck is straight
* a KILLER PLAYER !
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1970 FENDER JAZZ BASS NECK - made in USA :
* finish has lots of wear=check all pics
* 1 extra string tree screw hole on headstock face
* tons of extra screw holes on back of headstock from different tuners
* was refretted, but long time ago
* nicely aged block inlays
* a MAJOR MOJO PLAYER !

Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1971 FENDER TELECASTER BODY - made in USA :
* ash=NOT light weight
* refinished in banana yellow=spray can job
* TONE MACHINE !
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
PLENTY of PARTS for SALE
... more

1972 FENDER PRECISION MAPLE NECK - made in USA :
* very rare A-Size version=40 mm at nut=just like a Jazz Bass
* refretted with BIGGER frets
* BIGGER DOTS are installed, because previous owner had rhinestones inlaid=check last 2 pics
* plays GR 8 !

Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1968 GIBSON SG MELODY MAKER USA :
* nitro finish has LOTSA wear & weather checking
* neck has a 40 mm nut width
* SMALL headstock design=check pic 5 & 6
* minor heel repair=check last 4 pics
* Grover tuners installed
* OLD light weight mahogany=TONE
* just add your fave pickups and it is ready for the stairsteps to HELLLLLL
... more

1975 FENDER TELECASTER CUSTOM NECK - made in USA :
* finish has light wear
* frets have light wear
* hard to find
... more

1963 FENDER Jazzmaster case:
+ white tolex version, has discolouration on back and front, some wear
+ leather ends have rips (material missing)
+ light red interior, has wear and 1 ciggy burn
+ all latches work fine
+ very hard to find, was only made for 1 year
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1960 EPIPHONE by GIBSON MELODY MAKER USA :
* refinished
* NO neck breaks
* 42 mm wide neck profile=same specs as 50's Les Paul Junior & FLYING V fingerboards
* 5 fingerboard dots are replaced
* bridge stud holes were filled for a tunematic conversion
* original pickguard & pickup
* new pots
* new tuners
* old mahogany=TONE
* SOLD AS IS - NO RETURNS
... more

1972 FENDER TELECASTER THINLINE USA NECK :
* completely refinished
* a standard Telecaster logo was applied
* refretted
* the missing bullet trussrod nut will be included

PLENTY of PARTS for SALE
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
... more

1963 FENDER STRATOCASTER USA PICKGUARD :
* has shrunken as usual
* needs some sanding around pickup routs
* screws will fit ONLY IN AN ANGLE into body screw holes
* check pickup screw holes in the last 2 pics
* SOLD AS IS - NO RETURNS
... more

1983 Fender Precision Bass ELITE - made in USA:
* alder body finished in black, has some laquer wear
* maple neck, has laquer wear, XL WIDE=44 mm like Fender P-Basses from the 50's, but with thin back profile
* 1 split pickup, active electronics
* golden tuners
* golden bridge, has heavy wear, fine tuners are missing
* low action
* sounds & plays GREAT !
PLENTY of PARTS for SALE
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER ... more

1969 FENDER JAZZ BASS BODY - made in USA:
* alder body refinished in fiesta red, spray can job
* has a filled P-B pickup rout between the 2 pickups & a filled battery rout above control plate=check pics 8 & 9
* some oversanding around neck pocket=check last pic
* TONE MACHINE !
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1966 FENDER PRECISION BASS BODY - made in USA :
* refinished in metallic blue, worn
* lip in cutaway is still present
* has some small cracks below jack input & around body edge=check last 4 pics
* TONE MACHINE !
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1964 FENDER JAZZMASTER BODY - made in USA :
* refinished in red with WHITE SPARKLE=check last pic
* white racing trim around top edges
* back has some light uneven sanding
* way KOOOOOL !... more

1967 FENDER JAZZMASTER :
* made & raped in da USA
* body has a bunch of extra routs under pickguard
* spray can refin in vanilla
* body was SLIMMED DOWN & RESHAPED=check pic 3 & 4
* headstock was cut down by the same lunatiiiiccccccc=CHECK ALL PICS !
* a metal plate that will be held by the tuners is included to make it look like a regular headstock .from 12, 5 feet away
* extra side dots on right side installed
* could be revived by an experienced woodworm... more

1983 Fender Precision Bass ELITE - made in USA:
* alder body finished in black, has some laquer wear
* maple neck, has laquer wear, XL WIDE=44 mm like Fender P-Basses from the 50's, but with thin back profile
* 1 split pickup, active electronics
* golden tuners
* golden bridge, has heavy wear, fine tuners are missing
* low action
* sounds & plays GREAT !
... more

1975 Marshall Artiste Top:
* 100 watts output+ 2 channels
* built in reverb tank
* vinyl has a few small rips &; some of the gold lining is torn on top right side
* recently serviced
* old style round output jack was changed out to a new modern square type
* sounds great !
+PLENTY of PARTS for SALE
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT ... more

PROJECT:
1964 FENDER JAGUAR BODY:
* made & butchered in the USA
* refinished in black, spray can job
* bridge studs are canged out for larger models
* has a BUNCH of extra routs, that need to be filled
plus
1974 FENDER DUO SONIC USA NECK:
* refinished
* headstock slightly reshaped
* roller nut was added
* round button tuners with F covers
* NOTHING ELSE INCLUDED !... more

1966 FENDER JAGUAR BODY USA :
* refinished in natural
* brass shields are included
* full body depth
... more

1977 FENDER PRECISION BASS NECK USA - FRETLESS :
* nice dark rosewood fingerboard
* super hard to find !
... more

1964 GIBSON FIREBIRD CASE - made in USA :
* BODY IS NOT INCLUDED !
* 3 latch version
* total length inside is 111 cm=double check it with your guitar
* golden interior has stains
* has 3 smaller cracks on the sides
* 1 foot is missing
* gaffa tape residue at top end
* check ALL PICS
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

DYNACORD TUBE BODY GUITAR:
* 1 switch top is broken off
* changed bridge
* tremolo is not working
* changed tuners
* repaired headstock crack
* less than 200 were made
* UNIQUE !
... more

1969 GRETSCH COUNTRY GENTLEMAN - made in USA - PROJECT :
* needs body binding
* frets are low and also need to be replaced
* fingerboard has light hump behind 12th fret on low E side
* NO OTHER PARTS INCLUDED=JUST WHAT YOU CAN SEE IN THE PICS
... more

EPIPHONE OLYMPICmade in USA by GIBSON / 1969BODY MATERIALMAHOGANY - a stop tail piece was installedNECKMAHOGANYFINGERBOARDROSEWOODINLAYSDOTSPICKGUARDoriginal, wornFRETSare in good shapeTUNERSNEW tunersPICKUPS1 original singel cpoil & 1 Peavey humbucker was installedCONTROLS1 volume, 1 tone, 3 way selector , all new partsBRIDGEchrome tunematic styleOTHER PARTSnew pot knobsFINISHES2 tone sunburst, has laqur checking and wear
ATTENTION! OVER 1000 more ... more

1973 FENDER PRECISION BASS NECK - made in USA :
* finish is worn
* neck date has faded
* frets have WEAR=check last pic
* nickel tuners & string tree are included

Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1963 FENDER BASS VI CASE - made in USA :
* inside length=113 cm
* width=34 cm
* tolex has some wear
* leather ends have some rips
* handle has wear
* orange interior has wear
* all latches are working fine
* super hard to find !
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1982 FENDER STRATOCASTER USA :
* last one of the BIG HEADSTOCK series
* heavy ash body, routed for a humbucker & extra switches under pickguard
* original finish in black, blue undercoat, finish is BRITTLE, lots of weather checking, will relic like crazy everytime you touch it
* neck finish is also worn, mostly on the sides
* frets are okay for a few more years
* all parts are newer:
* new Schaller tuners
* new Wilkinson tremolo
* newer Fender USA pickups
* ... more

1969 Vox Violin Bass -- rare model with built in effects:
+ maple body finished in brown burst, has LOTS of wear, small crack in lower f-hole, back was loose around jack input plate and reglued --- WORN
+ maple neck with rosewood fingerboard, very thin profile=like a broomstick, plays awesome, frets are fine, has a minor glued seam crack on headstock around the Vox logo
+ 2 x single coil pickups
+ built in DISTORTION( .sounds way coooool !! ), Treble / Bass Booster and G ... more

1967 FENDER JAZZMASTER :
* made & raped in da USA
* body has a bunch of extra routs under pickguard
* spray can refin in vanilla
* body was SLIMMED DOWN & RESHAPED=check pic 4 & 5
* headstock was cut down by the same lunatiiiiccccccc=CHECK ALL PICS !
* a metal plate that will be held by the tuners is included to make it look like a regular headstock .from 12, 5 feet away
* extra side dots on right side installed
* could be revived by an experienced ... more

FENDER MUSTANG - made in USA :
* body=can be used as is=HENDRIX style RELIC
* pickups are both working
* both pots are new
* knobs are turning great
* original 1966 FENDER neck plate needs cleaning
* tremolo needs cleaning
* bridge needs extensive cleaning plus oil
* control plate needs cleaning
* tuners need new tips & cleaning
* fingerboard is only usable as CHARCOAL anymore
* back of neck can be brought back to life with lots of wood putty / ... more

1969 Vox Violin Bass -- rare model with built in effects:
+ maple body finished in brown burst, has LOTS of wear, small crack in lower f-hole, back was loose around jack input plate and reglued --- WORN
+ maple neck with rosewood fingerboard, very thin profile=like a broomstick, plays awesome, frets are fine, has a minor glued seam crack on headstock around the Vox logo
+ 2 x single coil pickups
+ built in DISTORTION( .sounds way coooool !! ), Treble / Bass Booster and G tuner
+... more

1975 Marshall Artiste Top:
* 100 watts output+ 2 channels
* built in reverb tank
* vinyl has a few small rips &; some of the gold lining is torn on top right side
* recently serviced
* old style round output jack was changed out to a new modern square type
* sounds great !
... more

1962 GIBSON MELODY MAKER USA :
* 42 mm wide profile neck=same specs as late 50's LP fingerboards
* refinished about 4 times=rough
* headstock has 2 minor cracks, 1 was repaired
* headstock was slimmed down=check last pic
* has a bunch of extra tuner screws holes on back
* some wood chipped at fingerboard curve below fret 5 & 11=check pics 6 & 7
* frets are LOOOOW* needs parts & TLC
* the good news=SUPER LIGHT... more

1975 FENDER PRECISION BASS NECK - made in USA :
* finish is worn
* frets are fine
* has a slight back bow around first 3 frets=will pull up perfectly straight with a set of 045 strings on
* has a minor laquer crack at E tuner=check last pic

Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!
... more

1969 GRETSCH COUNTRY GENTLEMAN - made in USA - PROJECT :
* needs body binding
* frets are low and also need to be replaced
* fingerboard has light hump behind 12th fret on low E side
* NO OTHER PARTS INCLUDED=JUST WHAT YOU CAN SEE IN THE PICS
* SOLD AS IS - NO RETURNS... more

1966 FENDER PRECISION BASS BODY - made in USA :
* refinished in cream=spray can job, will RELIC in 5 days
* top has some oversanding, contours are a bit sharper=check last pic
* TONE MACHINE !
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1978 FENDER PRECISION BASS NECK - made in USA :
* FRETLESS
* all maple neck with skunk stripe on back, super rare
* finish has a few dings & chips=check pic 9
* fingerboard is clean
* neck is straight
* brass nut installed
* original chrome tuners are included
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1978 FENDER PRECISION BASS NECK - made in USA :
* FRETLESS
* all maple neck with skunk stripe on back, super rare
* finish has a few dings & chips=check pic 9
* fingerboard is clean
* neck is straight
* brass nut installed
* original chrome tuners are included
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1979 DEAN Flying V -- made in USA:
* mahogany body refinished in natural
* mahogany neck with rosewood fingerboard, completely refinished including headstock=logo is gone, binding on sides is worn / replaced
* 2 x new HOT humbuckers
* SHIFT 2000 tremolo added
* new pots & knobs
* LOW ACTION --- ROCKS HARD !
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>
... more

1982 CHARVEL NECK - made in USA :
* early San Dimas model
* nice chunky profile
* extra string tree hole
* extra tuner screw holes on back
* filled hole at heel from a 3 bolt conversion
* 22 medium jumbo frets are in good shape
* finish has play wear
* dated at butt 3 - ? - 82=check last pic
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
... more

1967 FENDER CORONADO BASS NECK - made in USA :
* 30* short scale
* finish has wear
* frets are fine... more

1979 FENDER Stratocaster - made in USA:
* alder body refinished in blue with silver flakes, has wear, humbucker rout at bridge position, neck plate CONVERTED to a 4 BOLT
* maple neck with large headstock, has laquer wear
* new chrome tuners
* new 6 saddles vintage style bridge
* new plastic parts
* 3 x new FENDER TEX MEX single coil pickups
* low action
* sounds & plays perfect !
... more

1979 PHIL KUBICKI CUSTOM PJ BASS NECK - made in USA :
* nut width is just a bit over 41 mm=a cross between a Jazz & a P Bass
* finish has REAL HONEST wear
* eats any recent Fender Custom Shop neck for breakfast
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1979 / 82 FENDER PRECISION BASS NECK - made in USA :
* FRETLESS version, rare
* fingerboard is clean
* extra tuner screw holes on back
* finish is clean
* 1979 serial number on headstock, butt stamp is 11 3 82
* neck is straight
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!... more

1972 FENDER STRATOCASTER USA MAPLE NECK :
* 4 filled screw holes on headstock face
* extra screw holes at heel=check pic 5
* nice profile
* frets are okay
... more

1962 GIBSON MELODY MAKER - WIDE NECK :
* fingerboard has same specs as 50's Les Paul's And Flying V's
* nut width is 41, 8 mm
* body has a bunch of routs
* jack input is on side now
* the good news : has NO Floyd Rose rout yet
* a new headstock was crafted TWICE=check pic 9
* ready for a fingerboard transplant .
* SOLD AS IS - NO RETURNS... more

EPIPHONE OLYMPICmade in USA by GIBSON / 1969BODY MATERIALMAHOGANY - a stop tail piece was installedNECKMAHOGANYFINGERBOARDROSEWOODINLAYSDOTSPICKGUARDoriginal, wornFRETSare in good shapeTUNERSNEW tunersPICKUPS1 original singel cpoil & 1 Peavey humbucker was installedCONTROLS1 volume, 1 tone, 3 way selector , all new partsBRIDGEchrome tunematic styleOTHER PARTSnew pot knobsFINISHES2 tone sunburst, has laqur checking and wear... more

1960 EPIPHONE by GIBSON EPIPHONE MELODY MAKER USA - PROJECT : * 42 mm wide neck profile=same specs as 50's Les Paul Junior & FLYING V fingerboards
* very early single cut version
* refinished with a brush=rough
* routed for a Hagstrom tremolo
* fingerboard has play wear up to the 8th fret=check pic 7
* NO parts included
* old mahogany=TONE
* SUPER LIGHT !... more

1979 DEAN Flying V -- made in USA:
* mahogany body refinished in natural
* mahogany neck with rosewood fingerboard, completely refinished including headstock=logo is gone, binding on sides is worn / replaced
* 2 x new HOT humbuckers
* SHIFT 2000 tremolo added
* new pots & knobs
* LOW ACTION --- ROCKS HARD !
... more

1955 FENDER TELECASTER / STRATOCASTER NECK PLATE USA
... more

1975 FENDER JAZZ BASS NECK USA :
* finish was sanded down
* fingerboard has lots of scratches
* frets have wear
* new decal
* plays just fine !
... more

1972 FENDER PRECISION BASS NECK - made in USA :
* finish is completely stripped
* nice chunky profile
* frets are low, but okay to play without buzzing
* check ALL pics
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!
... more

1972 FENDER PRECISION BASS NECK - made in USA :
* finish is completely stripped
* nice chunky profile
* frets are low, but okay to play without buzzing
* check ALL pics... more

* serial number 088xx
* has scratches
... more

1980 BC RICH Bich - made in USA :
* very early production=was made by CHARVEL in San Dimas back in the day=RARE !
* mahogany body finished in brownburst, has wear
* maple neck with rosewood fingerboard, frets are excellent
* 3 & 3 headstock, blue BC RICH logo, 4 bolt design
* 2 DiMarzio humbuckers
* has a preamp, but it is ONLY HUMMING when switched on=needs repair
* Grover stair step tuners in chrome
* custom made brass bridge in gold, worn
* low action - plays ... more

1967 FENDER CORONADO 12 STRING NECK USA :
* finish has wear
* frets are fine
* 2 sets of SCHALLER M 6 tuners are included
* could be installed on a JAZZMASTER to turn into an ELECTRIC 12
... more

1967 FENDER CORONADO 12 STRING NECK USA :
* finish has wear
* frets are fine
* 2 sets of SCHALLER M 6 tuners are included
* could be installed on a JAZZMASTER to turn into an ELECTRIC 12
... more

1966 GIBSON MELODY MAKER -- made in USA:
+ mahogany body, refinished in white & blueburst plus graphics
+ mahogany neck with rosewood fingerboard, back and headstock also refinished, refretted
+ new tuners
+ new humbucker
+ new bridge
+ new pots and knobs
+ low action
+ ROX OUT !... more

HOPF BLUE GLITTER - RARE !
* body & neck were made by EKO back in the day
* 2 Hopf pickups
* Hopf tremolo
* XL headstock
* sounds UNIQUE !
... more

1962 GIBSON MELODY MAKER USA :
* 42 mm wide profile neck=same specs as late 50's LP fingerboards
* refinished about 4 times=rough
* headstock has 2 minor cracks, 1 was repaired
* headstock was slimmed down=check last pic
* has a bunch of extra tuner screws holes on back
* some wood chipped at fingerboard curve below fret 5 & 11=check pics 6 & 7
* frets are LOOOOW* needs parts & TLC
* the good news=SUPER LIGHT
* SOLD AS IS - NO RETURNS
... more

Rare Hoyer Electric Guitar, the first model that was made by the company :
+ alder body finished in redburst, clean
+ chunky maple neck with ebony fingerboard, set neck construction
+ 2 x single coil pickups
+ A RARE FIND !
... more

1977 FENDER PRECISION BASS NECK USA - FRETLESS :
* nice dark rosewood fingerboard
* super hard to find !
... more

1972 FENDER PRECISION BASS NECK- made in USA:
* converted to FRETLESS, slots are filled with wood putty
* last 3 frets have some double cuts and are filled a bit UNPRO
* headstock has a few small holes drilled at top end
* finish on back has wear
* neck is straight
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!
... more

1972 FENDER PRECISION BASS NECK- made in USA:
* converted to FRETLESS, slots are filled with wood putty
* last 3 frets have some double cuts and are filled a bit UNPRO
* headstock has a few small holes drilled at top end
* finish on back has wear
* neck is straight
Over 1000 more
GUITARS-BASSES-PARTS in our OTHER
AUCTIONS !!!!
TAKE A LOOK !!!
... more

1979 MUSIC MAN STINGRAY BASS NECK - made in USA :
* finish is very worn
* was refretted about 2 years ago
PLUS
* a newer body in satin black, NOT made by Music Man
* complete hardware is also newer & NOT made by Music Man
* set up with low fast action
* plays & sounds like a CHAMP !
PLENTY of PARTS for SALE
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT ... more

1975 FENDER JAZZ BASS NECK USA :
* finish was sanded down
* fingerboard has lots of scratches
* frets have wear
* new decal
* plays just fine !
... more

1969 EPIPHONE OLYMPIC - made in USA :
* body & neck only
* needs parts... more

1982 FENDER '62 AVRI FULLERTON STRATOCASTER NECK - made in USA :
* logo has wear
* locking nut & string retainer are installed
* frets are fine
* finish has wear
* neck profile is more on the slender side - NO baseball bat
* real MOJO to GO !
PLENTY of PARTS for SALE
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
... more

1982 EPIPHONE SG - made in USA=only very few were made back then in Kalamazoo :
* LIGHT WEIGHT=maple body
* NITRO FINISH with LOTS of weather checking
* body husk includes : pots, switch & tuners
* needs: nut, truss rod cover, pickups , knobs, electronics back plate & wraparound bridge
* nicely worn in=a REAL ROAD RELIC
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>... more

has scratches
* stamped 16 xxx
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
PLENTY of PARTS for SALE
... more

1961 FENDER STRATOCASTER USA PICKGUARD :
* 1 extra hole was drilled near pots
* has the usual shrinkage=you have to make routs & holes bigger
* some screws will fit only in an ANGLE into body screw holes
* if your guitar has a humbucker rout, a better fit will be more likely possible... more

1977 FENDER STRATOCASTER BODY - made in USA :
* HEAVY ash body=LOOONNG sustain
* original white turned cream was FINISHED over in matte brown
* can be brought back to the original finish with lots of elbow grease .
... more

1964 FENDER MUSTANG NECK - made in USA -:
* SUPER RARE 22, 5 INCH SCALE
* 38 mm width at nut=slim profile
* finish has wear
* frets have wear
... more

1955 FENDER TELECASTER PICKGUARD USA :
* has a groove played into material below HIGH E string=check pics 2 & 3
* right bottom tip is chipped
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>
... more

1957 FENDER STRATOCASTER NECK PLATE - made in USA :
* number stamped at bottom=rare
ATTENTION! OVER 1000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>... more

1979 MUSIC MAN STINGRAY BASS NECK - made in USA :
* finish is very worn
* was refretted about 2 years ago
PLUS
* a newer body in satin black, NOT made by Music Man
* complete hardware is also newer & NOT made by Music Man
* set up with low fast action
* plays & sounds like a CHAMP !... more

1955 FENDER TELECASTER / STRATOCASTER NECK PLATE USA:
* RARE
... more

1969 FENDER CORONADO I BODY - made in USA :
* finish has wear & tape residue sticking on it
* 1 pickup, pots, dice knobs and pickguard are included
ATTENTION! OVER 5000 more
GUITARS-BASSES-AMPS-PARTS
in our OTHER AUCTIONS !!!
CHECK OUR SHOP OUT -------------->>>>>-------------->>>>>
PLENTY of PARTS for SALE
... more